Lubrication Disclaimer: Akko applies a thin factory lube to reduce pings and noise for a better typing experience. For thick lubrication, hand-lubing is recommended.
Parameter
How to replace and install switches
Remove the keycaps with a keycap puller.
Remove the old switch with the switch puller.
Place the new switch on the right position.
Gently press new switches into PCB.
Are Akko switches pre-lubed?
Yes, Akko applies a thin factory lube to reduce pings and noise for a better typing experience. For thick lubrication, hand-lubing is recommended.
Will my keycap set fit those Akko switches?
Akko switches are compatible with almost every standard MX style keycap sets in different materials and heights.
Are these switches compatible with my keyboard?
Akko switches are compatible with most hot-swappable mechanical keyboard with 3-pin/5-pin sockets in a plug-and play fashion. They are not compatible with optical keyboard.
Akko V3 Pro Switches
 Bittersweet |  Rosewood |  Creamy Blue Pro |  Piano Pro |  Matcha Green Pro |  Silver Pro |  Creamy Yellow Pro | |
|---|---|---|---|---|---|---|---|
Customer Reviews | — | — | — | — | — | — | — |
Price | — | — | — | — | — | — | — |
Type | Tactile | Linear | Tactile | Linear | Linear | Linear | Linear |
Operating Force | 48gf ± 5gf | 40gf ± 5gf | 45gf ± 5gf | 45gf ± 5gf | 50gf ± 5gf | 40gf ± 5gf | 50gf ± 10gf |
Total Travel | 3.8mm | 4mm | 3.3mm | 3.1mm | 3.8mm | 3.3mm | 3.3mm |
Pre-Travel | — | 2.0 ± 0.5mm | 2.2 ± 0.5mm | 1.9 ± 0.5mm | 2.0 ± 0.5mm | 1.0 ± 0.5mm | 2.0 ± 0.6mm |
Tactile Position | 0.8mm | / | 0.5mm | / | / | / | / |
Tactile Force | 60 ± 5gf | / | 55gf ± 5gf | / | / | / | / |
Feature | Tactile version of Rosewood | Muted Low-Pitch Thocky Switch | THE Budget Choice | Clacky Switches | Clacky with a Deep Twist | Fast Actuation for Gaming | THE Budget Choice |
Lubrication Disclaimer: Akko applies a thin factory lube to reduce pings and noise for a better typing experience. For thick lubrication, hand-lubing is recommended.
Parameter
How to replace and install switches
Remove the keycaps with a keycap puller.
Remove the old switch with the switch puller.
Place the new switch on the right position.
Gently press new switches into PCB.
Are Akko switches pre-lubed?
Yes, Akko applies a thin factory lube to reduce pings and noise for a better typing experience. For thick lubrication, hand-lubing is recommended.
Will my keycap set fit those Akko switches?
Akko switches are compatible with almost every standard MX style keycap sets in different materials and heights.
Are these switches compatible with my keyboard?
Akko switches are compatible with most hot-swappable mechanical keyboard with 3-pin/5-pin sockets in a plug-and play fashion. They are not compatible with optical keyboard.
Akko V3 Pro Switches
Bittersweet | Rosewood | Creamy Blue Pro | Piano Pro | Matcha Green Pro | Silver Pro | Creamy Yellow Pro |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Type | ||||||
| Tactile | Linear | Tactile | Linear | Linear | Linear | Linear |
| Operating Force | ||||||
| 48gf ± 5gf | 40gf ± 5gf | 45gf ± 5gf | 45gf ± 5gf | 50gf ± 5gf | 40gf ± 5gf | 50gf ± 10gf |
| Total Travel | ||||||
| 3.8mm | 4mm | 3.3mm | 3.1mm | 3.8mm | 3.3mm | 3.3mm |
| Pre-Travel | ||||||
| — | 2.0 ± 0.5mm | 2.2 ± 0.5mm | 1.9 ± 0.5mm | 2.0 ± 0.5mm | 1.0 ± 0.5mm | 2.0 ± 0.6mm |
| Tactile Position | ||||||
| 0.8mm | / | 0.5mm | / | / | / | / |
| Tactile Force | ||||||
| 60 ± 5gf | / | 55gf ± 5gf | / | / | / | / |
| Feature | ||||||
| Tactile version of Rosewood | Muted Low-Pitch Thocky Switch | THE Budget Choice | Clacky Switches | Clacky with a Deep Twist | Fast Actuation for Gaming | THE Budget Choice |
