Ramp up the bass with the BOSS Audio Systems R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level.
Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control.
Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound, and performance to their system
- Class A/B, Monoblock, MOSFET power supply
- 1100 watts @2-ohms x 1 max, 550 watts @4-ohms x 1 max
- High & low level inputs, soft turn on circuit, thermal overload speaker and short protection
- Power & protection LEDs, variable low pass crossover 35–160 Hz
- Variable bass boost 0–18 dB, variable gain control, impedance 2–8 ohms
- THD @ RMS output: ?0.01%, S/N Ratio 102 dB, frequency response 9 Hz–50 kHz
- Fuse quantity (1) 30 amp ATO blade, dimensions 9.1” x 10.4” x 2.3”, weight 5.8 lbs.
- Remote subwoofer control
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Switchable Bass Boost
Switchable Bass Boost allows you to boost the low bass +18db.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Variable Gain Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Ramp up the bass with the BOSS Audio Systems R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level.
Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control.
Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound, and performance to their system
- Class A/B, Monoblock, MOSFET power supply
- 1100 watts @2-ohms x 1 max, 550 watts @4-ohms x 1 max
- High & low level inputs, soft turn on circuit, thermal overload speaker and short protection
- Power & protection LEDs, variable low pass crossover 35–160 Hz
- Variable bass boost 0–18 dB, variable gain control, impedance 2–8 ohms
- THD @ RMS output: ?0.01%, S/N Ratio 102 dB, frequency response 9 Hz–50 kHz
- Fuse quantity (1) 30 amp ATO blade, dimensions 9.1” x 10.4” x 2.3”, weight 5.8 lbs.
- Remote subwoofer control
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Switchable Bass Boost
Switchable Bass Boost allows you to boost the low bass +18db.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Variable Gain Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.