

Intelligent sensor, door open "ON", door close "OFF"

6 high-brightness LEDs, higher brightness

USB charging, Type-C interface
Iron surface mounting

1. Clean the installation location

2. Attach the lamp to the designated position

3. Take out the sensor sticker

4. Make the sticker face the sensing position of the lamp body
Plastic/wooden or other surface mount

1. Tear off the sticker of iron sheet

2. Paste the lamp at the designated location

3. The lamp body can be removed at will

4. Installation completed
Precautions for use:
- Please tear off the protective film before use
- This lamp has a light sensor. When the ambient light is bright, the light will go out and may not be able to turn on. Please use it in a dark place
- The induction sticker needs to be aligned with the sensing position of the lamp. When closing the door, the induction port needs to be completely covered so that the light will automatically turn off. If it cannot be turned off by induction, a lot of electricity will be wasted
- Because the lamp body is installed by magnetic suction, frequent opening and closing of the door may cause the lamp to move. It is recommended that you check the position of the lamp body frequently to ensure that the induction sticker is aligned with the sensing position of the lamp
![]() Car Dome Light | ![]() Car Foot Light | ![]() Car Ambient Light | |
|---|---|---|---|
| Customer Reviews | — | — | — |
| Price | — | — no data | — |
| TYPE | Car Dome Light | Car Foot Light | Car Ambient Light |

| Material | ABS, acrylic |
| Size | 10.2*3.2*0.9cm/4.02*1.26*0.35in |
| Battery | 400mAh Lithium battery |
| Charging time | 1-2 hours |
| Work time | about 30 days (usual daily use) |
| Lighting mode | Constantly on, colorful gradient, colorful breathing, fast flash, slow flash |
| Light color | white, pink, blue, green, ice blue, red, yellow |
| Package | 2* Door Lights |

Intelligent sensor, door open "ON", door close "OFF"

6 high-brightness LEDs, higher brightness

USB charging, Type-C interface
Iron surface mounting

1. Clean the installation location

2. Attach the lamp to the designated position

3. Take out the sensor sticker

4. Make the sticker face the sensing position of the lamp body
Plastic/wooden or other surface mount

1. Tear off the sticker of iron sheet

2. Paste the lamp at the designated location

3. The lamp body can be removed at will

4. Installation completed
Precautions for use:
- Please tear off the protective film before use
- This lamp has a light sensor. When the ambient light is bright, the light will go out and may not be able to turn on. Please use it in a dark place
- The induction sticker needs to be aligned with the sensing position of the lamp. When closing the door, the induction port needs to be completely covered so that the light will automatically turn off. If it cannot be turned off by induction, a lot of electricity will be wasted
- Because the lamp body is installed by magnetic suction, frequent opening and closing of the door may cause the lamp to move. It is recommended that you check the position of the lamp body frequently to ensure that the induction sticker is aligned with the sensing position of the lamp
![]() Car Dome Light | ![]() Car Foot Light | ![]() Car Ambient Light | |
|---|---|---|---|
| Customer Reviews | — | — | — |
| Price | — | — no data | — |
| TYPE | Car Dome Light | Car Foot Light | Car Ambient Light |


















