here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Installation location&No Wiring Required:
- central control + 4 doors handle lights + 4 Foot well lamp + 4 doors storage box light + 4 door horn light
- Notes: For multi-controller light kit, the main controller can control the sub-controllers. only when the main controller connects to the center console power supply, while the sub-controller connects the light bar to the power supply anywhere in the car, and all the lights can work in sync.
- Installation :
- 1.Insert the central control light, dashboard light and Foot well lamp into the main controller.
- 2.Use 4 doors, handle light and doors storage box light to connected the sub-controller.
- Power Connection Instructions:
- 1 Main Controller: Connect to the ACC power line on the vehicle’s center console.
- 4 Sub-Controllers: Connect to the 12V ACC power line inside each door, such as the power lines for the window motor, door lock actuator, or horn.
Specification:
RGB Acrylic Light Strip
- Voltage Dc:12V
- Number of LEDs: 593
- color: RGB Smart IC
- Output channel: 4CH/RGBW3CH/RGB
- operating temperature:-20°c to 60°c
Millions of Colors & Dynamic Mode
- Remote distance : 0 - 10M
- Phone app control: fit ios and android
- can choose your favorite mode, such as:
- fixed color, color bounce or sound sensing mode.
Non-folding, Bendable
- Feel Free to DIY Length
- 11.7mm Ultra-thin acrylic fiber optic light strip
Dual-Zone Control, with two colors simultaneously
- You can set the acrylic light strip and Foot well lamp+ Door handle light+doors storage box light area to different colors or modes at the same time. By combining them, you can create a wide variety of visual effects! Make your car stand out.
App Connection Steps:
- Scan the Bluetooth Controller QR+code, Download “High-end car ambient lighting” APP
- Turn on APP Bluetooth.
- Find the corresponding, matching bluetooth
- Turn on the switch
TIPS:
- Please test the light before installation.
- Please use it under specified voltage. If voltage is higher than limit voltage, components will be damaged. If voltage is lower than limit voltage, bulb will dim and feedback rhythm will slow down. remote control cannot issue commands, so please use it under specified voltage, To achieve original beautiful effect.
- Optical fibers must not be folded in half or overly bent , otherwise , the light cannot pass after damaged.
Package Contents:
- 22 in 1 Acrylic car light kit(4*29.5inch+1*43.3inch+1*14inch)
- Foot well lamp*4
- Door handle light*4+doors storage box light*4 +door horn light*4
- control box* 5
- extension cord * 2
- 2*Adhesive tape
- 1*Pry tool
Installation location&No Wiring Required:
- central control + 4 doors handle lights + 4 Foot well lamp + 4 doors storage box light + 4 door horn light
- Notes: For multi-controller light kit, the main controller can control the sub-controllers. only when the main controller connects to the center console power supply, while the sub-controller connects the light bar to the power supply anywhere in the car, and all the lights can work in sync.
- Installation :
- 1.Insert the central control light, dashboard light and Foot well lamp into the main controller.
- 2.Use 4 doors, handle light and doors storage box light to connected the sub-controller.
- Power Connection Instructions:
- 1 Main Controller: Connect to the ACC power line on the vehicle’s center console.
- 4 Sub-Controllers: Connect to the 12V ACC power line inside each door, such as the power lines for the window motor, door lock actuator, or horn.
Specification:
RGB Acrylic Light Strip
- Voltage Dc:12V
- Number of LEDs: 593
- color: RGB Smart IC
- Output channel: 4CH/RGBW3CH/RGB
- operating temperature:-20°c to 60°c
Millions of Colors & Dynamic Mode
- Remote distance : 0 - 10M
- Phone app control: fit ios and android
- can choose your favorite mode, such as:
- fixed color, color bounce or sound sensing mode.
Non-folding, Bendable
- Feel Free to DIY Length
- 11.7mm Ultra-thin acrylic fiber optic light strip
Dual-Zone Control, with two colors simultaneously
- You can set the acrylic light strip and Foot well lamp+ Door handle light+doors storage box light area to different colors or modes at the same time. By combining them, you can create a wide variety of visual effects! Make your car stand out.
App Connection Steps:
- Scan the Bluetooth Controller QR+code, Download “High-end car ambient lighting” APP
- Turn on APP Bluetooth.
- Find the corresponding, matching bluetooth
- Turn on the switch
TIPS:
- Please test the light before installation.
- Please use it under specified voltage. If voltage is higher than limit voltage, components will be damaged. If voltage is lower than limit voltage, bulb will dim and feedback rhythm will slow down. remote control cannot issue commands, so please use it under specified voltage, To achieve original beautiful effect.
- Optical fibers must not be folded in half or overly bent , otherwise , the light cannot pass after damaged.
Package Contents:
- 22 in 1 Acrylic car light kit(4*29.5inch+1*43.3inch+1*14inch)
- Foot well lamp*4
- Door handle light*4+doors storage box light*4 +door horn light*4
- control box* 5
- extension cord * 2
- 2*Adhesive tape
- 1*Pry tool