here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Installation Location & No Wiring Required:
- Central Control + 4 Doors
- Note: For lighting kits with multiple controllers, the master controller can control the slave controllers. All lights will operate in sync only when the master controller is connected to the vehicle’s center console power source and the slave controllers are connected to power sources at any location inside the vehicle.
- Installation:
- 1. Plug the central control light, dashboard light, and footwell light into the master controller.
- 2. Connect the 4 door lights, door handle lights, and door storage compartment lights to the sub-controllers.
- Power Connection Instructions:
- 1 Main Controller: Connect to the vehicle’s center console ACC power line.
- 4 Sub-controllers: Connect to the 12V ACC power line inside each door, such as the power line for the window motor, door lock actuator, or horn.
Specification:
6-in-1 Dreamcolor RGB Acrylic Light Strip for Car
- Voltage Dc:12V
- Number of LEDs: 600
- color: RGB+IC Multicolor
- Output channel: 4CH/RGBW3CH/RGB
- operating temperature:-20°c to 60°c
16 million colors & Dynamic Mode
- Remote distance : = 10m / 32.81ft
- Phone app control: fit ios and android
- can choose your favorite mode, such as:fixed color, color bounce or sound sensing mode.
Non-folding, flexible type
- Customizable length for DIY assembly
- 11.7 mm ultra-thin acrylic fiber optic light strip
App Connection Steps:
- Scan the Bluetooth Controller QR+code, Download “Magic Lantern” APP
- Turn on APP Bluetooth.
- Find the corresponding, matching bluetooth
- Turn on the switch
- Note: Android phones must have location services enabled and the necessary permissions granted.
TIPS:
- Please test the lights before installation.
- Please use the product within the specified voltage range. If the voltage exceeds the maximum limit, the components will be damaged. If the voltage falls below the minimum limit, the lights will dim and the flashing rhythm will slow down. The remote control will not be able to send commands, so please use the product within the specified voltage range to achieve the intended aesthetic effect.
- Never snap the fiber optic cable in half or bend it excessively, as damage will prevent light from passing through.
Package contents
- 6 in 1 Acrylic car light kit(4*29.5inch+1*43.3inch+1*14inch)
- control box* 5
- extension cord * 1
- push-button X 1
- 1*Adhesive tape
- 1*Pry tool
Installation Location & No Wiring Required:
- Central Control + 4 Doors
- Note: For lighting kits with multiple controllers, the master controller can control the slave controllers. All lights will operate in sync only when the master controller is connected to the vehicle’s center console power source and the slave controllers are connected to power sources at any location inside the vehicle.
- Installation:
- 1. Plug the central control light, dashboard light, and footwell light into the master controller.
- 2. Connect the 4 door lights, door handle lights, and door storage compartment lights to the sub-controllers.
- Power Connection Instructions:
- 1 Main Controller: Connect to the vehicle’s center console ACC power line.
- 4 Sub-controllers: Connect to the 12V ACC power line inside each door, such as the power line for the window motor, door lock actuator, or horn.
Specification:
6-in-1 Dreamcolor RGB Acrylic Light Strip for Car
- Voltage Dc:12V
- Number of LEDs: 600
- color: RGB+IC Multicolor
- Output channel: 4CH/RGBW3CH/RGB
- operating temperature:-20°c to 60°c
16 million colors & Dynamic Mode
- Remote distance : = 10m / 32.81ft
- Phone app control: fit ios and android
- can choose your favorite mode, such as:fixed color, color bounce or sound sensing mode.
Non-folding, flexible type
- Customizable length for DIY assembly
- 11.7 mm ultra-thin acrylic fiber optic light strip
App Connection Steps:
- Scan the Bluetooth Controller QR+code, Download “Magic Lantern” APP
- Turn on APP Bluetooth.
- Find the corresponding, matching bluetooth
- Turn on the switch
- Note: Android phones must have location services enabled and the necessary permissions granted.
TIPS:
- Please test the lights before installation.
- Please use the product within the specified voltage range. If the voltage exceeds the maximum limit, the components will be damaged. If the voltage falls below the minimum limit, the lights will dim and the flashing rhythm will slow down. The remote control will not be able to send commands, so please use the product within the specified voltage range to achieve the intended aesthetic effect.
- Never snap the fiber optic cable in half or bend it excessively, as damage will prevent light from passing through.
Package contents
- 6 in 1 Acrylic car light kit(4*29.5inch+1*43.3inch+1*14inch)
- control box* 5
- extension cord * 1
- push-button X 1
- 1*Adhesive tape
- 1*Pry tool