Much Quicker Cleaning
The YIHUA 200C tip cleaner is a tool to improve soldering efficiency. Let this cleaner handle the cleaning for you so you can get back to soldering as quickly as possible.
When compared to a wet sponge: Much quicker cleaning, and less temperature loss when cleaning.
When compared to a brass wool: Much quicker cleaning, and cleans more thoroughly.
Fast and Efficient Tip Cleaning
- Two rotating brass wool brushes inside
- Powered by a stepper motor
- Automatic activation enabled by infra-red sensor
- Compatible soldering iron tip size: approximately 4.6mm to 5.5mm outer diameter
Compact Design
- Space-saving dimensions (4.33*2.76*2.95 inches) ideal for small workspaces
- Seamlessly integrates into existing soldering setups for convenience
Complete Accessories
- 4 extra brass wool brushes, a pry bar, and a 12V adapter included
- Easy operation, cleaning, and replacement
High-quality Brass Wool Brushes
- 20% Thicker than Previous Generation
- More coverage when cleaning
- Better cleaning result
Brush Replacement and Residue Tray Cleaning
Step 1: Lift the upper casing
Step 2: Remove the retainer clip with the pry bar and remove the brush in the direction as indicated
Step 3: Clean any solder scrap off the residue tray
Step 4: Install the new brush into the rotor, and insert the retainer clip
Specification
 YIHUA #200CB |  YIHUA X-4 |  YIHUA X-2 |  YIHUA 853D USB 3A |  YIHUA 995D+ EVO |  YIHUA 948DQ-I | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Category | Replacement Brass Wool Brushes Set | Soldering Iron Holder | Soldering Iron Holder | 3-IN-1 Multi Station | 2-IN-1 Soldering Hot Air Station | Fume Extractor Fan |
| Temperature Range | no data | no data | no data | Hot Air:212~896°F,Soldering:392~896°F | Hot Air:212~896°F,Soldering:392~896°F | no data |
| Preset Channels | no data | no data | no data | no data | 3 | no data |
| PID Temperature Stabilization | no data | no data | no data | ? | ? | no data |
| Temperature Calibration | no data | no data | no data | ? | ? | no data |
| Sleep Mode | no data | no data | no data | ? | ? | no data |
Much Quicker Cleaning
The YIHUA 200C tip cleaner is a tool to improve soldering efficiency. Let this cleaner handle the cleaning for you so you can get back to soldering as quickly as possible.
When compared to a wet sponge: Much quicker cleaning, and less temperature loss when cleaning.
When compared to a brass wool: Much quicker cleaning, and cleans more thoroughly.
Fast and Efficient Tip Cleaning
- Two rotating brass wool brushes inside
- Powered by a stepper motor
- Automatic activation enabled by infra-red sensor
- Compatible soldering iron tip size: approximately 4.6mm to 5.5mm outer diameter
Compact Design
- Space-saving dimensions (4.33*2.76*2.95 inches) ideal for small workspaces
- Seamlessly integrates into existing soldering setups for convenience
Complete Accessories
- 4 extra brass wool brushes, a pry bar, and a 12V adapter included
- Easy operation, cleaning, and replacement
High-quality Brass Wool Brushes
- 20% Thicker than Previous Generation
- More coverage when cleaning
- Better cleaning result
Brush Replacement and Residue Tray Cleaning
Step 1: Lift the upper casing
Step 2: Remove the retainer clip with the pry bar and remove the brush in the direction as indicated
Step 3: Clean any solder scrap off the residue tray
Step 4: Install the new brush into the rotor, and insert the retainer clip
Specification
| Model | 200C |
| Rated Voltage Range(Adaptor) | 110V-240V~ |
| Rated Frequency(Adaptor) | 50-60Hz |
| Output (Adaptor) | DC12V1A |
| Motor Voltage | DC12V |
| Dimensions (Main Unit) | L4.33*W2.76*H2.95 ±0.2 inches |
| Ambient Temperature | 0~40°C / 32~104°F |
YIHUA #200CB | YIHUA X-4 | YIHUA X-2 | YIHUA 853D USB 3A | YIHUA 995D+ EVO | YIHUA 948DQ-I | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Category | Replacement Brass Wool Brushes Set | Soldering Iron Holder | Soldering Iron Holder | 3-IN-1 Multi Station | 2-IN-1 Soldering Hot Air Station | Fume Extractor Fan |
| Temperature Range | no data | no data | no data | Hot Air:212~896°F,Soldering:392~896°F | Hot Air:212~896°F,Soldering:392~896°F | no data |
| Preset Channels | no data | no data | no data | no data | 3 | no data |
| PID Temperature Stabilization | no data | no data | no data | ? | ? | no data |
| Temperature Calibration | no data | no data | no data | ? | ? | no data |
| Sleep Mode | no data | no data | no data | ? | ? | no data |