Product Features
The hot air handle and the electric soldering iron are independently plugged and switched, each other is independent, easy to replace, large double screen blue highlight display, double digital display button temperature adjustment, accurate setting and control temperature + 1°C, temperature adjustment range from 100°C to 480°C (212°F-896°F), temperature tolerance is + 2° C.
Large capacity hot air gun, heating quickly, gentle and big wind, suitable for lead and lead-free work. The most scientific and fashionable two-in-one design, equipped with high quality ABS plastic shell, the machine is compact and durable.
The whole machine adopts anti-static design, effectively eliminates the damage of SMD components. It also has the function of fault self-detection and fault warning.
The product adopts large screen, blue highlight, double digital display button, temperature adjustment, which can display accurate temperature.
Please work in strict accordance with the instruction manual and procedures.
make sure Please that the heat gun should be close to the bracket before turning on the machine to achieve the effect of induction.
Please note that
Before starting the machine, make sure that the power cord is firmly connected to the machine until it can be powered on normally. The machine can work normally only when it is normally powered on.
Induction system
The handle of hot air gun is an induction system. After the machine is connected to the power supply, make sure that the handle of hot air is placed on the bracket before opening. Then turn on the independent switch of the hot air gun, and pick up the handle to enter the working state.
Design of independent switch
Connect the Soldering iron handle and the hot air gun handle with the corresponding interface. After the power is turned on, turn on the corresponding independent switch and pick up the handle to enter the working state.
auxiliary Accessories
- 10 x solder tips
- 1 x clean ball
- 1 x Absorbent sponge
- 1 x cp wick
- 1 x copper solder wire
- 1 x Big solder wire
- 3 x Anti-static tweezers
- 1 x IC extractor
Safety advice
!The voltage of this product is 100-120v 60Hz.
!Please make sure to use the corresponding voltage at your address. If according to the abnormal voltage, it will cause damage to the Soldering station, or the components in the machine will burst due to the high voltage.
!In order to ensure your personal safety, please turn off the main power switch and unplug the power cord After work.
!Make sure to place all parts after they have cooled down.
MYPOUOS 2 in 1 Soldering station of Packing list
Standard configuration
1 x 8588D 2 in 1 Soldering Station
1 x Soldering iron handle
1 x hot air gun handle
4 nozzles ;1 x connecting line
1 x bracket ;1 x manual
Services provided
1.The goods are delivered by Fulfillment Service
2.If you encounter any problems when you receive the goods, We are very happy to solve it for you and we will provide you with a satisfactory reply.
Product Features
The hot air handle and the electric soldering iron are independently plugged and switched, each other is independent, easy to replace, large double screen blue highlight display, double digital display button temperature adjustment, accurate setting and control temperature + 1°C, temperature adjustment range from 100°C to 480°C (212°F-896°F), temperature tolerance is + 2° C.
Large capacity hot air gun, heating quickly, gentle and big wind, suitable for lead and lead-free work. The most scientific and fashionable two-in-one design, equipped with high quality ABS plastic shell, the machine is compact and durable.
The whole machine adopts anti-static design, effectively eliminates the damage of SMD components. It also has the function of fault self-detection and fault warning.
The product adopts large screen, blue highlight, double digital display button, temperature adjustment, which can display accurate temperature.
Please work in strict accordance with the instruction manual and procedures.
make sure Please that the heat gun should be close to the bracket before turning on the machine to achieve the effect of induction.
Please note that
Before starting the machine, make sure that the power cord is firmly connected to the machine until it can be powered on normally. The machine can work normally only when it is normally powered on.
Induction system
The handle of hot air gun is an induction system. After the machine is connected to the power supply, make sure that the handle of hot air is placed on the bracket before opening. Then turn on the independent switch of the hot air gun, and pick up the handle to enter the working state.
Design of independent switch
Connect the Soldering iron handle and the hot air gun handle with the corresponding interface. After the power is turned on, turn on the corresponding independent switch and pick up the handle to enter the working state.
auxiliary Accessories
- 10 x solder tips
- 1 x clean ball
- 1 x Absorbent sponge
- 1 x cp wick
- 1 x copper solder wire
- 1 x Big solder wire
- 3 x Anti-static tweezers
- 1 x IC extractor
Safety advice
!The voltage of this product is 100-120v 60Hz.
!Please make sure to use the corresponding voltage at your address. If according to the abnormal voltage, it will cause damage to the Soldering station, or the components in the machine will burst due to the high voltage.
!In order to ensure your personal safety, please turn off the main power switch and unplug the power cord After work.
!Make sure to place all parts after they have cooled down.
MYPOUOS 2 in 1 Soldering station of Packing list
Standard configuration
1 x 8588D 2 in 1 Soldering Station
1 x Soldering iron handle
1 x hot air gun handle
4 nozzles ;1 x connecting line
1 x bracket ;1 x manual
Services provided
1.The goods are delivered by Fulfillment Service
2.If you encounter any problems when you receive the goods, We are very happy to solve it for you and we will provide you with a satisfactory reply.