here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Meet Your Seller
80W Temperature ControlledDigital Soldering Station Kit | Soldering Iron Kit with 9 Accessories, Ceramic Core, 194896°F, Auto Sleep, Helping Hands
- ACCURATE DIGITAL TEMP DISPLAY - A 3.1 x 1.2 cm LED display on this soldering station shows the live tip temperature, not just a dial position. The rotary encoder dials in 1°C steps and jumps 10°C when spun fast, °C/°F switching sits in the settings menu, and built-in digital calibration lets you match the readout to your own reference gauge
- 80W CERAMIC CORE, 350°C IN ABOUT 40 SECONDS - The ceramic heating element brings the tip up fast so short jobs don't stall, and the wide 194896°F (90480°C) range covers light SMD rework through heavier through-hole joints on one soldering iron
- AUTO STANDBY & SLEEP, DESIGNED FOR BENCH USE - Leave the iron sitting and the station takes over: after 5 minutes idle it enters Standby and holds the tip at 200°C, then 10 minutes later it enters Sleep and stops heating (SLP shows on screen). Lock Screen freezes your settings so a bumped dial can't change them, and if a fault appears, E01/E02/E03error codes tell you what failed instead of leaving you guessing
- ONE-PIECE STAND THAT STAYS PUT - The spring iron holder and brass wool tray are built into the base, so the station won't tip or skate across your bench. The holder mounts on either side of the body and swaps left or right to fit how you work, the iron rests in a heat shield with a PVC cable, and a pair of flexible helping-hands arms holds your board steady with both hands free
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
TAKUMi KNS-P2225 Digital Soldering Station is an 80W temperature controlled soldering station for DIY electronics and beginners. A ceramic core reaches 350°C in about 40 seconds, and a 3.1 x 1.2 cm LED display shows the live tip temperature while a rotary encoder dials it in 1°C at a time.
Most joints fail for boring reasons - the tip is too cold to flow, or so hot it lifts a pad. The 194896°F (90480°C) range covers SMD pads, circuit boards, RC connectors and heavier wire. Digital calibration matches the readout to your own reference gauge, and °C/°F switching sits in the settings menu.
Safety without babysitting. Leave the iron down: after 5 minutes the station enters Standby at 200°C, then enters Sleep 10 minutes later and stops heating (SLP on screen). Lock Screen keeps a bumped dial from changing your temperature.
A stand that holds its ground. The spring iron holder and brass wool tray are built into the base, so it stays put. The holder mounts on either side and swaps left or right, the iron rests in a heat shield with a PVC cable, and a pair of helping-hands arms holds the board with both hands free.
In the box: soldering station (120V / 60 Hz, 80W) · soldering iron · spare soldering tip · a pair of helping-hands arms · solder wire · wire dispenser · brass wool tip cleaner · desoldering pump · curved tweezers. A user manual is included.
Specifications:
- 80W · 120V AC / 60 Hz
- 194896°F (90480°C) · 350°C in about 40 seconds
- Ceramic heating element · 3.1 x 1.2 cm LED display · 1°C steps
- Calibration · °C/°F switch in the menu · Standby 200°C after 5 min idle · Sleep 10 min later
- Lock Screen · factory reset · error codes E01/E02/E03
- Leaded and lead-free solder compatible · FCC Part 15 Class B compliant
A step up from a fixed-temperature pencil iron: set a number, read the real tip temperature, stop guessing.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Mikiomie Dire Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...