here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
Schematic Circuit Diagram
Note:
1. The soldering time should not be too long, 1-3 seconds, otherwise the copper sheet will fall off. If it is not soldered once, remove the soldering iron and solder it again. Be sure to be optimistic about the production pictures and text, distinguish the positive and negative poles, and pay attention to the white silk screen welding of the corresponding components when welding.
2. The vibration switch must be close to the circuit board, and cannot be high on one side and low on the other.
Read the parameters of the color ring resistor
- The resistance value is usually represented by color codes, and color ring resistors indicate the parameters of resistance based on the different colors on the surface.
- The kit includes 4 pcs resistors, Refer to the "5-band" resolution resistor.
Product Parameters
- Product size: 51mm*51mm(2.008*2.008inches)
- Power input: +3V~5V.
- Product weight: 20g.
- LED Quantity: 10pcs 5mmLED lights.
- LED color: two each of yellow, green, blue, red, and white.
- Function: Welding practice
Package List
- 2pCS PCB Circuit Board
- 8pcs Resistor(10k,470k,470R)
- 2pcs Ceramic Capacitor(103)
- 4pcs Capacitor
- 20pcs Led
- 4pcs IC(NE555,CD4017)
- 2pCS Tactile Switch
- 2pCS Triode(9014)
- 1pcs Installation instruction
Schematic Circuit Diagram
Note:
1. The soldering time should not be too long, 1-3 seconds, otherwise the copper sheet will fall off. If it is not soldered once, remove the soldering iron and solder it again. Be sure to be optimistic about the production pictures and text, distinguish the positive and negative poles, and pay attention to the white silk screen welding of the corresponding components when welding.
2. The vibration switch must be close to the circuit board, and cannot be high on one side and low on the other.
Read the parameters of the color ring resistor
- The resistance value is usually represented by color codes, and color ring resistors indicate the parameters of resistance based on the different colors on the surface.
- The kit includes 4 pcs resistors, Refer to the "5-band" resolution resistor.
Product Parameters
- Product size: 51mm*51mm(2.008*2.008inches)
- Power input: +3V~5V.
- Product weight: 20g.
- LED Quantity: 10pcs 5mmLED lights.
- LED color: two each of yellow, green, blue, red, and white.
- Function: Welding practice
Package List
- 2pCS PCB Circuit Board
- 8pcs Resistor(10k,470k,470R)
- 2pcs Ceramic Capacitor(103)
- 4pcs Capacitor
- 20pcs Led
- 4pcs IC(NE555,CD4017)
- 2pCS Tactile Switch
- 2pCS Triode(9014)
- 1pcs Installation instruction