929D-V Electric Desoldering Soldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering

This is a plug-and-play desoldering iron. It regulates temperature automatically, and the temperature setting is fixed (non-adjustable). Preheat the desoldering iron for approximately 3 to 5 minutes to ensure proper heating for soldering tasks. This 929D-V desoldering iron combines a soldering iron and a desoldering pump in one unit. You can perform single-handed and continuous desoldering with its compact handle, eliminating the need to change grip positions. If you are seeking a desoldering tool that can handle through-hole components and remove excess solder (solder bridges) without clogging, this is an excellent option. Unlike traditional single-use desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean out the solder with ease. It contains 2 different, interchangeable desoldering nozzles (1.0mm & 1.2mm) for various sizes of through-hole components. NOTE: Change the nozzle only after the desoldering iron has cooled down completely. This desoldering iron includes a heat deflector at the end of the heating element, which prevents excess heat from transferring to your hand during continuous desoldering. You can desolder joint after joint without your hands feeling uncomfortably hot. Note: This model is intended to operate on 110-127V with a US-standard power plug. Clean the desoldering iron with the included cleaning pin regularly as per the operating instructions to ensure clog-free use. Read the operating instructions and connect the soldering iron to an electrical outlet correctly to ensure proper heating