TROUBLE SHOOTING GUIDE
To reset your heater, when the Overheat Protection System has been activated:
1.Turn the Power Control Switch to the “0” postion, and turn the Temperature Control Switch to the lowest setting, 2. Disconnect the power cord from the electrical outlet.
3. Allow your heater to cool down for approximately ten minutes, 4. Ensure that both the intake and exhaust vents are clear of obstructions.
5. Connect the power cord to the electrical outlet 6. Turn the Power Control Switch to the “?“ position, and tum the Temperature Control Switch to the highest setting.
7. If your heater does not operate normally, turn the PowerControl Switch to the "0" position, disconnect the power cord from the electrical outlet, and consult an authorized repair technician.
The unit fails to operate:
1.Some wrong operations have been taken.-- Review the manual to ensure that the basic operations and features are fully understood.
2.Something is wrong with the household circuit breaker or fuse.-- Check the household circuit breaker or fuse.
3.Check for obstructions at the intake and exhaust vents.-- If obstructions are present, please refer to the instructions to reset the heater when the Overheat Protection System has been activated.
If no obstructions are present and the heater still does not operate normally, please turn the Power Control Switch to the “0” position, disconnect the power cord from the electric outlet, and consult an authorized repair technician.
IMPORTANT INSTRUCTIONS:
- This heater is hot when in use.To avoid burns,do not let bare skin touch hotsurfaces.If provided,use handles when moving this heater.Keep combustiblematerials,such as furniture,pillows,bedding,papers,clothes ateast 3 feet(0.9m)from the front of the heater and keep them away from thesides and rear.
- Extreme caution is necessary when any heater is used by or near children orinvalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions,has been dropped or damaged in any manner.Discard heater,or return to authorized service facility for examination and/or repair.
- Do not use outdoors
- This heater is not intended for use in bathrooms,laundry areas and similarndoor locations.Never locate heater where it may fallinto a bathtub or otherwater container.
- Do not run cord under carpeting.Do not cover cord with throw rugs,runners,or similar coverings.Do not route cord under furniture or appliances.Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater,turm controls off,then remove plug from outlet
- Do not insert or allow foreign objects to enter any ventilation or exhaustopening as this may cause an electric shock or fire,or damage the heater.
- To preventa possible fire,do not block air intake or exhaust in any manner.Do not use it on soft surfaces,like a bed,where openings may becomeblocked.
Kismile is a high-end brand dedicated to designing and manufacturing home appliances. Our company was founded in 2015 and is located in California. Since its inception, the products of the Kismile brand have entered millions of households and brought convenience to their lives.
Combining safety, innovative technology and cost-effectiveness, we provide consumers with pragmatic products to help you live a better life.
Space heater-with Handle
- Three heat settings with fan only.
- Adjustable thermostat.
Small space heater
With built-in handle and multiple security protection.
Hot Sale
Hot Sale
Kismile is a high-end brand dedicated to designing and manufacturing home appliances. Our company was founded in 2015 and is located in California. Since its inception, the products of the Kismile brand have entered millions of households and brought convenience to their lives.
Combining safety, innovative technology and cost-effectiveness, we provide consumers with pragmatic products to help you live a better life.
Space heater-with Handle
- Three heat settings with fan only.
- Adjustable thermostat.
Small space heater
With built-in handle and multiple security protection.
Hot Sale
Hot Sale
TROUBLE SHOOTING GUIDE
To reset your heater, when the Overheat Protection System has been activated:
1.Turn the Power Control Switch to the “0” postion, and turn the Temperature Control Switch to the lowest setting, 2. Disconnect the power cord from the electrical outlet.
3. Allow your heater to cool down for approximately ten minutes, 4. Ensure that both the intake and exhaust vents are clear of obstructions.
5. Connect the power cord to the electrical outlet 6. Turn the Power Control Switch to the “?“ position, and tum the Temperature Control Switch to the highest setting.
7. If your heater does not operate normally, turn the PowerControl Switch to the "0" position, disconnect the power cord from the electrical outlet, and consult an authorized repair technician.
The unit fails to operate:
1.Some wrong operations have been taken.-- Review the manual to ensure that the basic operations and features are fully understood.
2.Something is wrong with the household circuit breaker or fuse.-- Check the household circuit breaker or fuse.
3.Check for obstructions at the intake and exhaust vents.-- If obstructions are present, please refer to the instructions to reset the heater when the Overheat Protection System has been activated.
If no obstructions are present and the heater still does not operate normally, please turn the Power Control Switch to the “0” position, disconnect the power cord from the electric outlet, and consult an authorized repair technician.
IMPORTANT INSTRUCTIONS:
- This heater is hot when in use.To avoid burns,do not let bare skin touch hotsurfaces.If provided,use handles when moving this heater.Keep combustiblematerials,such as furniture,pillows,bedding,papers,clothes ateast 3 feet(0.9m)from the front of the heater and keep them away from thesides and rear.
- Extreme caution is necessary when any heater is used by or near children orinvalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions,has been dropped or damaged in any manner.Discard heater,or return to authorized service facility for examination and/or repair.
- Do not use outdoors
- This heater is not intended for use in bathrooms,laundry areas and similarndoor locations.Never locate heater where it may fallinto a bathtub or otherwater container.
- Do not run cord under carpeting.Do not cover cord with throw rugs,runners,or similar coverings.Do not route cord under furniture or appliances.Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater,turm controls off,then remove plug from outlet
- Do not insert or allow foreign objects to enter any ventilation or exhaustopening as this may cause an electric shock or fire,or damage the heater.
- To preventa possible fire,do not block air intake or exhaust in any manner.Do not use it on soft surfaces,like a bed,where openings may becomeblocked.