PTE aim at delivering the best value products at an affordable tag for both amateurs and professionals handyman and handywoman.
With this in mind, our brand focus on bringing tools which make good on their promises and deliver good performances without burning a hole in your pocket.
Broken Circuits Have Nowhere To Hide
Thanks to PTE Wire Tracer, you can trace wires in a range of applications including buried wires, single strand, broken wires, etc. and verify the continuity of your installation.
Kit includes PTE Wire Tracer Probe and Transmitter with RJ11 phone connector and a pair of alligator clips.
Note: Two 9V batteries required. Batteries are not included.
- FIND WIRES QUICKLY AND ACCURATELY - Detect and trace wires from source to termination. (Use only on Alligator clip in Tone Mode).
- FLEXIBLE USAGE - Thanks to the CONT mode you can check for short and open circuits, and the RJ11 connector lets you test telephone
- ADJUSTABLE - Adjustable sensitivity for differentiating wires in close proximity and avoid false detection
- NO RISK - One-year coverage and friendly service from seller TrueToSource!
Signal Detector
Non-contact probe audibly identifies selected wire or cable.
Rotate the volume/sensitivity control on the probe for the appropriate level and sensitivity to identify and trace the wire.
Signal Sender
Switch to Tone Mode and use only one alligator clip to Trace Wire.
Switch to Continuity Mode and use both alligator clips to check for continuity and short circuit.
Alligator Clips
In Tone mode connect the red clip to the Wire you wish to trace and the black clip to ground if possible.
In Continuity mode connect each clip to each end of the circuit cable. If the wire is short circuited or broken the Red LED with light. You can then use Tone mode to trace the wire all the way to the break location.
RJ-11 Plug
Use the RJ-11 plug to identify ring and tip telephone line and test the line condition (clear, busy, ringing).
Instruction
Broken Circuits Have Nowhere To Hide
PTE aim at delivering the best value products at an affordable tag for both amateurs and professionals handyman and handywoman.
With this in mind, our brand focus on bringing tools which make good on their promises and deliver good performances without burning a hole in your pocket.
Thanks to PTE Wire Tracer, you can trace wires in a range of applications including buried wires, single strand, broken wires, etc. and verify the continuity of your installation.
Kit includes PTE Wire Tracer Probe and Transmitter with RJ11 phone connector and a pair of alligator clips.
Note: Two 9V batteries required. Batteries are not included.
- FIND WIRES QUICKLY AND ACCURATELY - Detect and trace wires from source to termination. (Use only on Alligator clip in Tone Mode).
- FLEXIBLE USAGE - Thanks to the CONT mode you can check for short and open circuits, and the RJ11 connector lets you test telephone
- ADJUSTABLE - Adjustable sensitivity for differentiating wires in close proximity and avoid false detection
- NO RISK - One-year coverage and friendly service from seller TrueToSource!
Signal Detector
Non-contact probe audibly identifies selected wire or cable.
Rotate the volume/sensitivity control on the probe for the appropriate level and sensitivity to identify and trace the wire.
Signal Sender
Switch to Tone Mode and use only one alligator clip to Trace Wire.
Switch to Continuity Mode and use both alligator clips to check for continuity and short circuit.
Alligator Clips
In Tone mode connect the red clip to the Wire you wish to trace and the black clip to ground if possible.
In Continuity mode connect each clip to each end of the circuit cable. If the wire is short circuited or broken the Red LED with light. You can then use Tone mode to trace the wire all the way to the break location.
RJ-11 Plug
Use the RJ-11 plug to identify ring and tip telephone line and test the line condition (clear, busy, ringing).
Instruction