5-in-1 Battery Meter, Intelligent Cell Meter Digital Battery Checker/Balancer for LiPo / LiFePO4 / Li-ion/NiCd/NiMH Battery Packs

Multi-purpose battery meter - The Tenergy 5-in-1 cell meter estimate voltages for LiPo/LiFePO4/Li-ion (2-7 cells) packs and NiCd / NiMH batteries for TX and RX (4-7 cells). This meter does not turn on until it is connected to a compatible battery pack (not included).
Compatible with LiPo/LiFePO4/Li-ion battery packs that have a balance connector or NiCd / NiMH battery packs that have Hitech or Futaba connectors. The battery capacity checker requires no additional accessories and is powered by the testing battery pack to quickly evaluate the pack's capacity.
Battery discharger - At the discharge rate of 180mA, the battery balancer discharger can discharge lithium-based battery packs to an adjustable threshold. By discharging your battery prior to charging will improve the runtime of your battery.
Balances batteries - The battery tester with balancer function helps to optimize your batteries performance and extend the overall lifespan by ensuring the individual cells are balanced.
Internal resistance tester - For lithium-based battery packs, the battery internal resistance tester function will display the internal resistance of each individual cell. Use the battery checker tester to evaluate the health of your battery pack and decide when to discard or replace it.

How to connect LiPO or NiMH battery packs with meter

Compatibility information:

Tenergy 5-in1 Cell Meter uses the test battery as a power source (does not require outlet adapter).
Li-ion/LiPo/LiFePO4 hobby battery packs NEED a balance connector in order to be tested.
NiMH/NiCd battery packs NEED a Hitech/Futaba connector, or an adapter, in order to be tested.
Li-ion/LiPo/LiFePO4 battery packs without a balance connector CAN NOT be tested.

WARNING

To avoid overheating, the discharge function can only be used for less than 6 minutes each time. After that, let the unit cool down to room temperature before discharging again.
DO NOT leave your battery discharging with this device unattended.

Compatibility information:

Tenergy 5-in1 Cell Meter uses the test battery as a power source (does not require outlet adapter).
Li-ion/LiPo/LiFePO4 hobby battery packs NEED a balance connector in order to be tested.
NiMH/NiCd battery packs NEED a Hitech/Futaba connector, or an adapter, in order to be tested.
Li-ion/LiPo/LiFePO4 battery packs without a balance connector CAN NOT be tested.

WARNING

To avoid overheating, the discharge function can only be used for less than 6 minutes each time. After that, let the unit cool down to room temperature before discharging again.
DO NOT leave your battery discharging with this device unattended.

Brand	aFe Power
Features	Meter and Manual, Battery Powered, false
Sports Team	1 Piece

Meet Your Seller