[ Original Authorized ] WOYO HBR012 Induction Heating Bolt Remover Car Body Repair With 4 Coil Kit 12V Mini Induction Heater Tool HBR012

Friendly Tip: We provide HBR012 (12V), HBR110 (110V) for optional, both the 2 models are the same functions and same color. Black means HBR012, Gray means HBR110, you can choose what you prefer. WOYO HBR Induction Heating Bolt Remover Machine for Rusted / Frozen / Corrosive Bolt / Nut from Car and Machine Why Choose the
WOYO HBR: Every technician knows the hardest most time consuming work in the repairing process is parts removal, especially with seized nuts and bolts. The traditional way is use welding gun to heat those parts. but with the open of flame, human and neaby substance can suffer from potential danger. Morover, Inconvenience of unnecessary removal and installation procedures can seriously erode your profitability. With the WOYO HBR flameless heating, techinicians can quickly and easily perform damage-free parts removal. the sooner vehicles can be disassembled and repairs begun, The sooner you start making money.
Features: - Easy to use, only 3 minutes to master. - Green, Safety, Flameless, Lossless Heating system - Equipped with two LED lights for narrow and dark space. - Do not damage the bolt and the material around the equipment. - It is a flameless tool that can quickly and easily loosen rusted-on bolts. - More coils are available. Each line is suitable for the size of different types of bolts. - Fastest 60 seconds to 500°C, rapid heating, easy to remove rusty screws with wrench. - It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools. - The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. - Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage. Specification
Model: HBR012 / HBR110 / HBR220
Input voltage: 12V / 110V 50/60Hz / 220V 50/60Hz
Input current: 40A / 7A / 4A
Output power: 500W / 500-900W / 500-900W
Output voltage: 40V / 45V / 25V
Output current: 120A / 180A / 180A Tool Safety
1. Before plugging in the heating inductor, make sure that the outlet voltage supplied is compatible with the voltage marked on the label and within 10% of the stated voltage. An outlet voltage incompatible with that specified on the label can result in serious hazards and damage to the heating inductor.
2. Ensure attachment is securely located. Coil and main are firmly tightened before use.
3. Do not use the heating inductor for longer than the stated duty cycle: 5 minutes on followed by 5 minutes off. The main circuit board has an overheat protection device, however the attachments do not have overheat protection so should not be used for more than 5 minutes of continued use.
4. Please ensure that the cooling fan is running when the power switch is operated, if the fan does not run DO NOT use the heating inductor and contact us.
5. Do not attempt to create more than 4 coils when using the? exible soft coil, a minimum of 2 coils and a maximum 3 to 4 coils is the optimum number needed for best operation.
6. Do not leave the coil plugged into the HBR mains when not in use.
7. Do not attempt to repair the HBR by yourselves. Please contact us
Packing List: Screw*2 User Manual*1 Woyo HBR Mainset*1 1m Flexible Soft Coil*1 18mm coil (diameter of bore) *1 (Length 20cm) 22mm coil (diameter of bore) *1 (Length 20cm) 28mm coil (diameter of bore) *1 (Length 20cm)