Balmar Digital Duo Charge - 12/24V

BALMAR DIGITAL DUO CHARGE 12/24 VOLT W/ WIRES DDC-12/24Digital Duo Charge - 12/24VThe Digital Duo Charge (DDC-12/24) provides a hands off solution for charging two battery banks without the use of problematic isolators or manual battery switches. During charging the DDC-12/24 monitors voltage at the house battery. When voltage exceeds the set minimum (typically 13.2V in a 12V system and 26.4V in a 24V system) the DDC-12/24 automatically engages, providing up to 30A charge current to the starting battery. When no charge source is present, the DDC-12/24 separates the batteries so the starting battery wont be accidentally discharged into the house battery.

An optional solenoid control enables higher start battery charging output when required.
Features: Multi Bank ChargingThe DDC is a Solid-State Battery CombinerControl Voltage and Current between House and Start BatteriesEliminates the Need for an Isolator, Relay or Manually Operated Battery SwitchUsed in Concert with Max Charge or ARS-5 RegulatorsCan also be Employed without a Balmar RegulatorWorks in Both 12V and 24V ApplicationsHouse and Start Batteries can be different technologiesStart Battery Temperature Sensing Available with the MC-TS-B Sensor Cable4 Battery Programs Supported for the
Start Battery: Standard Flooded, Deep Cycle Flooded, AGM and Gel Cell