The MOTOPOWER MP00205C 12V 800mA Battery Charger is an all-weather battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for charging and maintaining all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell).
Charge and Maintain all types of 12V lead-acid batteries
Low-Voltage Activation & Recovery
Pulse current applied for batteries between 4 - 8volts. Increase the battery voltage gradually to optimize the cells and restore their best performance.
Absorption Mode
Force pulse current in the absorption stage to desulfate the cells. Removing the troublesome crystals and absorb into the charge cycle.
Maintain at 13.6volts Indefinitely
Maintain the battery with float current close to 0.1 - 0.5amp and keep the battery at 13.6V+/-0.2V indefinitely. Restart charging when voltage drops.
Charging Stages
Five CHARGING STAGES - Diagnosis, Soft Start, Bulk Charge, Absorption and Float/Maintenance. Bring the batteries to back to life.
Benefits and Features - The best choice for your batteries
Energy-Save & Safety
No output without load. No battery drain when connecting with battery. Spark free for safety.
Recondition Batteries
Sulfation detection and repair cells damage. Optimize the battery chemistries.
Thermal Compensation
Stable performance for any climate. Low temperature activation.
Timer Protection
24-hour absorption/desulfation. Stop automatically when fully charged or when time's up.
Quick Release Connection - Durable Wire
Automatic battery desulfation recovery
- Apply with pulse current technology to desulfate the batteries effectively.
- Safe charge with small current to keep battery health and extend battery life.
- Optimize the battery performance automatically.
- No need any manual operation.
- Quick Release Connection design with Ring terminal cable and Alligator clamp cable.
- 18AWG heavy-duty durable wire.
Plug and Play Features:
The MOTOPOWER MP00205C 12V 800mA Battery Charger allows you to connect the charger to the battery and leave it for maintenance indefinitely. Once the battery has reached a 100% charge, the chargers will automatically switch it's output voltage to a safe, storage/float level (13.6V+/-0.2V) that eliminates the need to worry about the damaging effects of overcharging.
Pulse Current Recovery Mode:
In the Absorption Mode, the charger will give a 0.5Amp pulse current to charge and recover the battery until it's fully charged. In this stage, the charger will decrease the battery sulfation and improve the battery performance gradually. For several times charging, you will find the battery internal resistance is lower and the performance is improved.
Technical Details:
- Input Voltage: 100-240V AC / 60Hz. - Output Voltage: 12 Volts DC @ 800mA
- Charged Voltage: 14.2+/-0.2 Volts. - Maintenance Voltage: 13.6+/-0.2 Volts
- Activate Voltage: 4Volts
Package Includes:
- Battery Charger x 1 - SAE Alligator Clamp Cable x 1 - SAE Eyelet Terminal Cable(7.5A fused) x 1 - Instruction Manual x 1
 MP00205C 12V 800mA [Junior Plus] |  MP00205B 12V 1000mA [Optimizer X] |  MP00206A 12V 1.5Amp [Senior] |  MP00207A 12V 2Amp [Advanced] |  MP00207 6V / 12V 4AMP [Intelligent] |  MP00205A 12V 800mA [Junior] | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Battery Voltage | 12V | 12V | 12V | 12V | 6V & 12V | 12V |
| Charging Current | 800mA | 1000mA | 1.5Amp | 2Amp | 2Amp & 4Amp | 800mA |
| Maintenance Mode | ? | ? | ? | ? | ? | ? |
| Charging Stages | 5 | 5 | 5 | 5 | 7 | 5 |
| Overcharge Protection | ? | ? | ? | ? | ? | ? |
| Short Circuit Protection | ? | ? | ? | ? | ? | ? |
| Reverse Polarity Protection | ? | ? | ? | ? | ? | ? |
| Spark-proof | ? | ? | ? | ? | ? | ? |
| Battery Repair | Pulse current recovery | Pulse current recovery | Pulse current recovery | Pulse current recovery | Repair Mode | Pulse current recovery |
THE IDEAL POWER SOLUTION
Visit our store for more products
MOTOPOWER is the direct manufacturer specializing in the eletrical products and accessories for automotive and powersports industry, such as battery chargers, battery testers, diagnostic tool, cell phone chargers, cables and more. All the products are designed, produced and sold directly by MOTOPOWER.
Get the best products here at the most competitive cost directly from MOTOPOWER store on .
Battery Chargers Series
OBD2 Diagnostic Tool | Classic
- Car Code Reader and Scanner
- Scan and erase the fault codes
OBD2 Code Reader |Professional
- Scan, Fix and Erase fault codes
- The latest diagnostic technology
OBD2 Diagnostic Tool |Advanced
- Scan, Fix and Erase fault codes
- More speed and powerful
OBD2 Diagnostic Tools Series
Battery Load Tester
- Quick Test the health of the battery/alternator
- A must-have tool in your tool box
Battery Testers Series
USB Chargers Series
The MOTOPOWER MP00205C 12V 800mA Battery Charger is an all-weather battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for charging and maintaining all 12-volt lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell).
Charge and Maintain all types of 12V lead-acid batteries
Low-Voltage Activation & Recovery
Pulse current applied for batteries between 4 - 8volts. Increase the battery voltage gradually to optimize the cells and restore their best performance.
Absorption Mode
Force pulse current in the absorption stage to desulfate the cells. Removing the troublesome crystals and absorb into the charge cycle.
Maintain at 13.6volts Indefinitely
Maintain the battery with float current close to 0.1 - 0.5amp and keep the battery at 13.6V+/-0.2V indefinitely. Restart charging when voltage drops.
Charging Stages
Five CHARGING STAGES - Diagnosis, Soft Start, Bulk Charge, Absorption and Float/Maintenance. Bring the batteries to back to life.
Benefits and Features - The best choice for your batteries
Energy-Save & Safety
No output without load. No battery drain when connecting with battery. Spark free for safety.
Recondition Batteries
Sulfation detection and repair cells damage. Optimize the battery chemistries.
Thermal Compensation
Stable performance for any climate. Low temperature activation.
Timer Protection
24-hour absorption/desulfation. Stop automatically when fully charged or when time's up.
Quick Release Connection - Durable Wire
Automatic battery desulfation recovery
- Apply with pulse current technology to desulfate the batteries effectively.
- Safe charge with small current to keep battery health and extend battery life.
- Optimize the battery performance automatically.
- No need any manual operation.
- Quick Release Connection design with Ring terminal cable and Alligator clamp cable.
- 18AWG heavy-duty durable wire.
Plug and Play Features:
The MOTOPOWER MP00205C 12V 800mA Battery Charger allows you to connect the charger to the battery and leave it for maintenance indefinitely. Once the battery has reached a 100% charge, the chargers will automatically switch it's output voltage to a safe, storage/float level (13.6V+/-0.2V) that eliminates the need to worry about the damaging effects of overcharging.
Pulse Current Recovery Mode:
In the Absorption Mode, the charger will give a 0.5Amp pulse current to charge and recover the battery until it's fully charged. In this stage, the charger will decrease the battery sulfation and improve the battery performance gradually. For several times charging, you will find the battery internal resistance is lower and the performance is improved.
Technical Details:
- Input Voltage: 100-240V AC / 60Hz. - Output Voltage: 12 Volts DC @ 800mA
- Charged Voltage: 14.2+/-0.2 Volts. - Maintenance Voltage: 13.6+/-0.2 Volts
- Activate Voltage: 4Volts
Package Includes:
- Battery Charger x 1 - SAE Alligator Clamp Cable x 1 - SAE Eyelet Terminal Cable(7.5A fused) x 1 - Instruction Manual x 1
MP00205C 12V 800mA [Junior Plus] | MP00205B 12V 1000mA [Optimizer X] | MP00206A 12V 1.5Amp [Senior] | MP00207A 12V 2Amp [Advanced] | MP00207 6V / 12V 4AMP [Intelligent] | MP00205A 12V 800mA [Junior] | |
|---|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — | — |
| Price | — | — | — | — | — | — |
| Battery Voltage | 12V | 12V | 12V | 12V | 6V & 12V | 12V |
| Charging Current | 800mA | 1000mA | 1.5Amp | 2Amp | 2Amp & 4Amp | 800mA |
| Maintenance Mode | ? | ? | ? | ? | ? | ? |
| Charging Stages | 5 | 5 | 5 | 5 | 7 | 5 |
| Overcharge Protection | ? | ? | ? | ? | ? | ? |
| Short Circuit Protection | ? | ? | ? | ? | ? | ? |
| Reverse Polarity Protection | ? | ? | ? | ? | ? | ? |
| Spark-proof | ? | ? | ? | ? | ? | ? |
| Battery Repair | Pulse current recovery | Pulse current recovery | Pulse current recovery | Pulse current recovery | Repair Mode | Pulse current recovery |
THE IDEAL POWER SOLUTION
Visit our store for more products
MOTOPOWER is the direct manufacturer specializing in the eletrical products and accessories for automotive and powersports industry, such as battery chargers, battery testers, diagnostic tool, cell phone chargers, cables and more. All the products are designed, produced and sold directly by MOTOPOWER.
Get the best products here at the most competitive cost directly from MOTOPOWER store on .
Battery Chargers Series
OBD2 Diagnostic Tool | Classic
- Car Code Reader and Scanner
- Scan and erase the fault codes
OBD2 Code Reader |Professional
- Scan, Fix and Erase fault codes
- The latest diagnostic technology
OBD2 Diagnostic Tool |Advanced
- Scan, Fix and Erase fault codes
- More speed and powerful
OBD2 Diagnostic Tools Series
Battery Load Tester
- Quick Test the health of the battery/alternator
- A must-have tool in your tool box
Battery Testers Series
USB Chargers Series