Can't reach the maximum charging current?
To protect battery, the system automaticaly identifes battery voltage and selects the most appropriate curent to charge, for example, when 12V battery voltage less than 11V, it automatically charges the battery at the maximum current.
The LifePO4 battery is not fully charged?
When the battery is fully charged, it has a callback function, reducing the charge by about 1V-2V, which is normal. Added a small current after full charge uninterrupted charging.
Fan noise?
It is normal that the fan has wind.
Notice
- Only charge the lithium battery with battery protection board(BMS).
- Charge the battery below 15AH with the minimum current
- If the lithium (BMS) cannot reach the cut-off voltage, it needs to be charged in low current mode because the BMS triggers the protection of the battery.
- It is not a jump starter or battery booster
P20 Smart Battery Charger Parameters
AC input :100v-240v~ 50/60 hz; Output voltage :12V / 24V. Lithium /LiFePO4/ lead acid (AGM,GEL,EFB, MF, Flooded, VRLA, SLA and wet battery..)
Output current :12V20A & 24V10A ; Support AH: 2-300AH, it can support larger capacity, which needs longer charging time.
Minimum starting voltage:2.0 V ; Power and load : MAX; 280 W
Size :158 x90x50mm(6.22 * 3.54 * 1.97 inches)
Net weight: 520 g
Can't reach the maximum charging current?
To protect battery, the system automaticaly identifes battery voltage and selects the most appropriate curent to charge, for example, when 12V battery voltage less than 11V, it automatically charges the battery at the maximum current.
The LifePO4 battery is not fully charged?
When the battery is fully charged, it has a callback function, reducing the charge by about 1V-2V, which is normal. Added a small current after full charge uninterrupted charging.
Fan noise?
It is normal that the fan has wind.
Notice
- Only charge the lithium battery with battery protection board(BMS).
- Charge the battery below 15AH with the minimum current
- If the lithium (BMS) cannot reach the cut-off voltage, it needs to be charged in low current mode because the BMS triggers the protection of the battery.
- It is not a jump starter or battery booster
P20 Smart Battery Charger Parameters
AC input :100v-240v~ 50/60 hz; Output voltage :12V / 24V. Lithium /LiFePO4/ lead acid (AGM,GEL,EFB, MF, Flooded, VRLA, SLA and wet battery..)
Output current :12V20A & 24V10A ; Support AH: 2-300AH, it can support larger capacity, which needs longer charging time.
Minimum starting voltage:2.0 V ; Power and load : MAX; 280 W
Size :158 x90x50mm(6.22 * 3.54 * 1.97 inches)
Net weight: 520 g