Your Browsing History
Meet Your Seller
Battery Charger 0-20A,12V/24V Lithium Battery Charger for LIFePo4,Lead Acid,AGM,RV,Marine,Boat, and Deep Cycle Batteries,9 Stage with Pulse Repair,Smart Car Trickle Charger & Maintainer
- WIDELY USED - 20A car battery charger charges all 12V/24V Lithium, LiFePO4, and Lead Acid (AGM/Gel/SLA..) batteries with 20Amp max current! The one-touch start ensures hassle-free operation, while the compact design fits seamlessly in garages, boats, or travel kits.Perfect for fast charging various batteries and large vehicles such as trucks, boats, motorcycles, golf carts, tractors, and RVs. NOTE-It will not start the battery or repair a completely lost battery, the battery voltage is not lower than 2V.
- NOTE: 1. Please check the battery voltage before using the charger. 2. If an over-discharged 24V battery is not recognized by the charger or is incorrectly recognized as a 12V battery, please press and hold the button for 6s until the buzzer sounds, then connect the battery. Press and hold the button again for 6s to activate the powerful mode. Be sure to disconnect the power supply to deactivate this mode after 5 minutes. 3. If you are not satisfied with the charger, please contact RCGCBC for a replacement or refund.
- ENJOY VISUAL CHARGING - Our 24v car battery charger is equipped with a large LCD screen, which can digitally and intuitively display your battery charging status and charging parameters- including charging voltage, current, mode, charging temperature(/°C), charging percentage, summer mode , winter mode, etc, which are more intuitive and easier to use.
- AUTOMATIC CHARGING - The lithium battery charger automatically detects 12V or 24V battery and monitor the whole
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Notice
- Only charge the lithium battery with battery protection board(BMS).
- Charge the battery below 15AH with the minimum current
- If the lithium (BMS) cannot reach the cut-off voltage, it needs to be charged in low current mode because the BMS triggers the protection of the battery.
- It is not a jump starter or battery booster
P20 Smart Battery Charger Parameters
AC input :100v-240v~ 50/60 hz; Output voltage :12V / 24V. Lithium /LiFePO4/ lead acid (AGM,GEL,EFB, MF, Flooded, VRLA, SLA and wet battery..)
Output current :12V20A & 24V10A ; Support AH: 2-300AH, it can support larger capacity, which needs longer charging time.
Minimum starting voltage:2.0 V ; Power and load : MAX; 280 W
Size :158 x90x50mm(6.22 * 3.54 * 1.97 inches)
Net weight: 520 g
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by Glovibe Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















