![1Zero GPS Suction Cup Mount for Garmin [Quick Extension Arm], Replacement GPS Dash Ball Mount Das...](http://c1.neweggimages.com/sellingpilot/modules/product/a-plus/04dee2ccba6e7b22f557731a92ae64d81ef2d2fcdd8bf3b2dd12eece4824a6a4.jpg)
Navigate with Confidence—Your GPS Stays Secure, No Matter the Road
Built for professional drivers and road warriors who demand reliability. The 1Zero heavy-duty mount keeps your Garmin GPS exactly where you need it, through rough terrain, extreme temperatures, and thousands of miles.
8-Level Suction Locks Tight
Keeps your GPS securethrough stops, potholes, and rough roads.
Flexible Arm Adjusts Anywhere
Double-rib aluminum arm bends and 360° ball joint keeps your GPS clear of your view and controls.
Remove in One Second
One-pull tab enables instant release, making vehicle changes quick and hassle-free.
Extreme Temperature Tested
Performs flawlessly from -4°F to 140°F. Tested on 10,000+ mile journeys.
Instant Compatibility Check
Designed for Garmin GPS Devices with 22mm Ball Socket
Compatible with DriveSmart 86, Overlander, dezl OTR 800/810/820/1000/1010/1020, RV 890/895/1090/1095. NOT compatible with zumo, StreetPilot, or older Garmin series. Check your device's back for the 22mm ball socket before ordering.
Install in Under 60 Seconds—No Tools Required
Clean Surface
Wipe windshield area with alcohol pad for maximum suction.
Press & Lock
Press the suction cup firmly, then push the tab until it clicks securely into place.
Mount GPS
Snap your Garmin onto the 22mm ball, adjust it to your preferred angle, and tighten the nut.
Perfect Position
Adjust arm for optimal viewing without blocking windshield or controls.
How do I know if this mount fits my Garmin GPS model?
This mount is designed for Garmin devices with a 22mm ball socket on the back. Check your device's back—if you see a circular socket approximately 22mm wide, it will fit.
Will the suction cup damage my windshield or leave marks?
No. The suction cup uses vacuum pressure only—no adhesives or chemicals. It leaves zero residue and won't damage windshield coatings, tint, or glass. Simply pull the quick-release tab to remove cleanly.
Is installation really tool-free ?
Completely tool-free. No drilling, no adhesive, no permanent installation. Remove anytime when needed.
What’s in the package?
The package includes one GPS mount with a 22mm ball head and one user manual. Please note that the mounting bracket, ball socket, and cradle are not included. Please purchase them separately if needed.
Find Your Perfect Fit—Explore More 1Zero GPS Car Mounts
 Heavy-Duty 22mm Ball GPS Mount |  2 Pack Small Suction Cup Mount |  Adjustable Dashboard GPS Mount |
|---|---|---|
Extra-Large Vacuum Suction Cup 4 1/3" large vacuum suction cup delivers 8-level powerful suction. | Low-Profile & Adjustable Sleek design with adjustable arm offers perfect angles and glare-free use. | Adjustable Arm It features an innovative dual-axis design for flexible two-way adjustment. |
Double-Rib Metal Arm Double-Rib aluminum arm ensures superior strength and stability. | Powerful Gel Suction Cup Upgraded sticky gel base grips firmly on dashboards and windshields. | Widened and Enlarged GPS Mount Say goodbye to the hassle of a wobbly or loose mount. |
Standard 22mm Ball Joint Fits DriveSmart 86, dezl OTR 800/810/820/1000/1010/1020, RV 890/895/1090/1095. | Standard 17mm Ball Joint It is specifically designed for Garmin GPS featuring a 17mm swivel ball socket. | Standard 17mm Ball Joint It is specifically designed for Garmin GPS featuring a 17mm swivel ball socket. |
Tool-Free Installation Simply press and lock the suction cup in place. No tools required. | Tool-Free Installation Simply press and lock the suction cup in place. No tools required. | Tool-Free Installation Just peel and stick. No tools or drilling required. |
Quick Release & Adjustable Quick release & 360° adjustability for effortless positioning. | Washable & Reusable Rinse with warm water and air dry to restore. | Easy Removal Gently remove with floss or card; wipe clean with alcohol if needed. |
Navigate with Confidence—Your GPS Stays Secure, No Matter the Road
Built for professional drivers and road warriors who demand reliability. The 1Zero heavy-duty mount keeps your Garmin GPS exactly where you need it, through rough terrain, extreme temperatures, and thousands of miles.
8-Level Suction Locks Tight
Keeps your GPS securethrough stops, potholes, and rough roads.
Flexible Arm Adjusts Anywhere
Double-rib aluminum arm bends and 360° ball joint keeps your GPS clear of your view and controls.
Remove in One Second
One-pull tab enables instant release, making vehicle changes quick and hassle-free.
Extreme Temperature Tested
Performs flawlessly from -4°F to 140°F. Tested on 10,000+ mile journeys.
Instant Compatibility Check
Designed for Garmin GPS Devices with 22mm Ball Socket
Compatible with DriveSmart 86, Overlander, dezl OTR 800/810/820/1000/1010/1020, RV 890/895/1090/1095. NOT compatible with zumo, StreetPilot, or older Garmin series. Check your device's back for the 22mm ball socket before ordering.
Install in Under 60 Seconds—No Tools Required
Clean Surface
Press & Lock
Mount GPS
Perfect Position
Wipe windshield area with alcohol pad for maximum suction.
Press the suction cup firmly, then push the tab until it clicks securely into place.
Snap your Garmin onto the 22mm ball, adjust it to your preferred angle, and tighten the nut.
Adjust arm for optimal viewing without blocking windshield or controls.
How do I know if this mount fits my Garmin GPS model?
This mount is designed for Garmin devices with a 22mm ball socket on the back. Check your device's back—if you see a circular socket approximately 22mm wide, it will fit.
Will the suction cup damage my windshield or leave marks?
No. The suction cup uses vacuum pressure only—no adhesives or chemicals. It leaves zero residue and won't damage windshield coatings, tint, or glass. Simply pull the quick-release tab to remove cleanly.
Is installation really tool-free ?
Completely tool-free. No drilling, no adhesive, no permanent installation. Remove anytime when needed.
What’s in the package?
The package includes one GPS mount with a 22mm ball head and one user manual. Please note that the mounting bracket, ball socket, and cradle are not included. Please purchase them separately if needed.
Find Your Perfect Fit—Explore More 1Zero GPS Car Mounts
Adhesive 17mm GPS Mount
17mm GPS Mount
![1Zero GPS Suction Cup Mount for Garmin [Quick Extension Arm], Replacement GPS Dash Ball Mount Das...](//c1.neweggimages.com/sellingpilot/modules/product/a-plus/04dee2ccba6e7b22f557731a92ae64d81ef2d2fcdd8bf3b2dd12eece4824a6a4.jpg)
Power to Hold Your Journey