4 Pack Bathroom Shower Caddy Connectors Suction Cups

MANDATORY WARM WATER SOAK REQUIRED TO ACTIVATE SUCTION SHAPE Due to packaging compression, suction cups may arrive temporarily flattened. You MUST soak them in warm water for 2-3 minutes before use to restore their original concave shape. A flat cup will never create a vacuum seal. Do not skip this step. SURFACE COMPATIBILITY PERFORM THE 1-HOUR TEST FIRST Before attaching to your caddy, test the cup on your wall. Clean and dry a small area, firmly press the cup on, and wait 1 hour. If it falls off, your wall is incompatible.

ONLY for smooth, non-porous
surfaces: glass, mirror, glazed tile, polished metal, acrylic. NOT for textured tiles, grout lines, wallpaper, or painted walls. DESIGNED AS A STABILIZER NOT A WEIGHT-BEARING MOUNT These cups are engineered to secure the side rails of hanging shower caddies against the wall to prevent swinging. They are NOT designed to be the only weight-bearing support for stand-alone, adhesive-based wire basket caddies holding heavy bottles. confirm your caddy type before purchase. CORRECT STEP-BY-STEP ATTACHMENT SEQUENCE this order for optimal hold: Soak cups in warm water (Step 1). Clean both the cup and wall surface with rubbing alcohol and allow to air dry completely. Slide the cup's opening over the caddy's side pole, position against the wall. Press firmly from the center outward until air is expelled and the cup's lip makes wrinkle-free contact. TROUBLESHOOTING & DIRECT SUPPORT If the cup won't hold, repeat the warm water soak and alcohol cleaning steps, then test on a mirror or glass to verify suction power. This helps determine if the issue is the wall surface or the cup. If problems persist, message us directly for a prompt solution we are committed to your satisfaction.