






How to Use It! - Paintless Dent Repair (PDR) Puller Kit
1. Clean & Prep: Clean the dent area thoroughly. It must be clean and dry.
2. Glue a Tab: Heat the hot glue stick(Hot Glue Stick Not Included). Apply a generous amount of glue to a pull tab. Firmly press the tab onto the dent. Wait for the glue to harden.
3. Pull the Dent: Attach the expander to the tabs. Use a steady, pulling motion. Do not over-pull.
(Tip: Pull a little, look at the result)
4. Repeat: Re-position the tab on another part of the dent and repeat steps 2-3 until the dent is gone.
5. Final Clean-up: Re-heat and remove any glue residue.
(Be Patient: Many small pulls are better than one big one.)







How to Use It! - Paintless Dent Repair (PDR) Puller Kit
1. Clean & Prep: Clean the dent area thoroughly. It must be clean and dry.
2. Glue a Tab: Heat the hot glue stick(Hot Glue Stick Not Included). Apply a generous amount of glue to a pull tab. Firmly press the tab onto the dent. Wait for the glue to harden.
3. Pull the Dent: Attach the expander to the tabs. Use a steady, pulling motion. Do not over-pull.
(Tip: Pull a little, look at the result)
4. Repeat: Re-position the tab on another part of the dent and repeat steps 2-3 until the dent is gone.
5. Final Clean-up: Re-heat and remove any glue residue.
(Be Patient: Many small pulls are better than one big one.)


















