HK4 Hardwire Kit with 8-piece Complete Circuit Fuse Tap, Type-C Port for A329 Series/A229 Series/A119Mini2/A139Pro/WM1/T130 Car Logger

24 Hours Parking MonitoringWhen the engine is off, the HK4 hardwire kit provides continuous power to the camera, any collision, event will be recorded.

Low Voltage ProtectionHK4 hardwire allows you to set the voltage cutoff value with 4 options, when the voltage of the vehicle battery drops to the cutoff value, it will stop powering your CarLog camera, thus protecting your battery from discharging.

Automatic switching to parking modeThrough ACC detection, if the vehicle engine is turned off, the CarLog will automatically switch to parking mode. When the vehicle engine is started, the CarLog will switch to normal recording.

Compatible with 12 / 24VHK4 ACC hardwire kit connects the camera directly to a car, truck, bus, SUV, or big rig for continuous power supply, accepting voltage from any type of vehicle operating at 12 - 24V.

The hardwire cable length is 13.1 feet (4 meters). The red battery cable should be connected to constant power.ACC The yellow cable should be connected to the ignition. The ground cable should be connected to the body.

NOTE: You will need to have 2 fuse connectors to use the hardwire cable. hk4 hardwire kit is for use with the A329S/A229Plus/A229Pro/A119Mini 2/A139Pro/WM1/T130 CarLogger, and is not compatible with any of our other line of CarLoggers.