
About US
Mini USB OBD Charger with On/Off Switch

- Ideal for dash cameras, GPS, radar, and dash cams on the market. Just plugs into your car stock OBD or OBD2 port directly.
- Note: This unit DOES NOT work with EV Car/Electric Vehicle
- Cable length:3.5meter(11.5 ft)
- Input: 11.6V-36V | Output: 5V/2.1A.
- Note:1.If the working mode is not switching properly in some vehicels,please unplug and plug the cable from the OBD port then restart the car again;
- 2.For some dashcams our cable may not work properly with them, please refer to incompatible brand list in the product description.

OBD Power Adapter
Obtaining power from OBD interface only, no interference in other OBD data communication.

- Suitable for most Mini USB port electronic devices
- Note: PLEASE be aware it's not plug and play with Gar-min GPS. If you're cool with cutting 2 USB cords apart, and soldering them back together then by all means go for it :)
- You could took the USB cable from the current charger, and cut the top off and cut the end of this one off and soldered it into this OBD adapter. After you did this it worked perfect!

- Have Two Work Modes:
- Mode1: In this "MODE -", 24H parking monitoring, continue to power supply after the car is turned off, until the car battery is lower than 11.6V, the OBD line will automatically stop power supply after a delay of 5 minutes
- Mode2: Press the red button switch to “MODE O” --The car ignites and starts the power supply, and the OBD line automatically stops the power supply after the car is turned off and delayed for 20 minutes, turn off the output
0BD/BODll Distribution Postion



- OBD2 to mini USB OBDII Adapter Hardwire Charger Cable ideal for dash cam GPS navigator, DVR, radar detector and more mini USB port devices.
- It is mini USB OBD power, please note it
Mini USB OBD Charger with On/Off Switch

- Ideal for dash cameras, GPS, radar, and dash cams on the market. Just plugs into your car stock OBD or OBD2 port directly.
- Note: This unit DOES NOT work with EV Car/Electric Vehicle
- Cable length:3.5meter(11.5 ft)
- Input: 11.6V-36V | Output: 5V/2.1A.
- Note:1.If the working mode is not switching properly in some vehicels,please unplug and plug the cable from the OBD port then restart the car again;
- 2.For some dashcams our cable may not work properly with them, please refer to incompatible brand list in the product description.

OBD Power Adapter
Obtaining power from OBD interface only, no interference in other OBD data communication.

- Suitable for most Mini USB port electronic devices
- Note: PLEASE be aware it's not plug and play with Gar-min GPS. If you're cool with cutting 2 USB cords apart, and soldering them back together then by all means go for it :)
- You could took the USB cable from the current charger, and cut the top off and cut the end of this one off and soldered it into this OBD adapter. After you did this it worked perfect!

- Have Two Work Modes:
- Mode1: In this "MODE -", 24H parking monitoring, continue to power supply after the car is turned off, until the car battery is lower than 11.6V, the OBD line will automatically stop power supply after a delay of 5 minutes
- Mode2: Press the red button switch to “MODE O” --The car ignites and starts the power supply, and the OBD line automatically stops the power supply after the car is turned off and delayed for 20 minutes, turn off the output
0BD/BODll Distribution Postion



- OBD2 to mini USB OBDII Adapter Hardwire Charger Cable ideal for dash cam GPS navigator, DVR, radar detector and more mini USB port devices.
- It is mini USB OBD power, please note it


























