Wire Thread Inserts M6x1 Metric 1.5D 9mm, 50Pcs 304 Stainless Steel Helical Coiled Wire Screw Threaded Sleeve Sheath for Mechanical Equipment Automotive Repairs

Size: M6x1 Metric; Effective
Length (After Installation): 1.5D = 9mm; Drilling Diameter (Drill diameter before tapping): 6.2 mm;
Material: 304 Stainless Steel;: Tone;
Packing List: 50Pcs x Wire Screw Sleeves. Crafted from 304 stainless steel, the insert boasts exceptional hardness, good corrosion, and oxidation resistance, ensuring long-lasting usage.
Advantages: The kit has a certain elasticity and vibration resistance, which can make the load on the more uniform and eliminate the pitch deviation between the screw and the screw hole; the is deep and clear, not easy to loosen, fall off or deform, which greatly improves the strength and stability of the threaded connection and extends the service life of the equipment.
Application: Threaded sleeves are commonly used in mechanical equipment and engineering machinery, which are the first choice for and overhaul across various industries including aviation, semiconductor equipment, automobiles, steam turbines, electronic communications, computers, lamps, molds and radiators.
Instruction:
1. Drill a hole using the specified drill size.
2. Use a ST tap to create threads, ensuring the tap size matches the bolt.
3. Place the insert onto the installation and adjust the height of the tube.
4. Lightly push the insert into the hole until the end of the insert is 1/4 to 1/2 inch above the surface of the hole.
5. Use a -cutting to break off the excess insert at the marked line.
Note: Before use, make the screw insert matches the threaded hole. Avoid over-tightening the screw insert during use to avoid damaging or loosening the.