Helunsi 32.8ft Cloth Covered Lamp Cord, 18 AWG 2 Conductor Silver Vintage Electrical Cord Braided Electrical Wire, 18 Gauge Round Rayon Fabric Covered Wire for DIY Antique Industrial Lighting Project

Safety of UseHelunsi round cloth covered wire is made of high purity copper covered with oxidized tin, PVC insulation layer, with strong insulation and heat resistance that can prolong its service life. The interior wires are UL recognized and the exterior woven rayon cloth covering is aesthetic and retro.
High Quality MaterialThe wire conductor is wrapped in thick and insulated hard PVC, stiff and heavy, making electrical appliances safer to use.
Color: silver (Shiny/Bright surface).
Wire type: 18 gauge (2 x 0.824 mm²), in line with the north american low power electrical code standards.
Copper conductor: 2 way.
Rating voltage: 300V.
Cloth cover outer diameter: 0.23 in (6mm). Length (1
Roll): 32.8 ft / 10 meters.
Easy to Use1. Please take off the masking tape wrapped around both ends of the wire, re-wrap it in the peeling position you need to fix it, and then stripping off the PVC insulation layer, which can effectively prevent the rayon cloth from unraveling when stripping the wire.
2. Use wire strippers or utility knives to slowly cut the white PVC insulation inward until you see the internal wire and stop peeling. (Please see the fifth stripping diagram)
Wide ApplicationCloth covered wires are essential for your home repair. It is not only great for replacing your old or damaged wires, but also for DIY lighting projects and appliances, and can be used to wire antique/vintage Lamps, pendant light, fans, ceiling fixtures, small appliances, etc.
Note The Color and Package1. The pictures are taken in kind, and there will inevitably be slight color difference due to camera shooting parameters, indoor or outdoor lighting and monitors of different brands, so please look closely at dsiplay details of colors in the figure. 2. In order to protect cloth covered wires from breaking during transportation, they are rolled up into a ball in the box. After unpacking, lay flat for 12 hours to straighten and eliminate kinks.