On/Off Switch & Automatically Sensor
Topgreener In Wall PIR Motion Sensor Light Switch
A simple yet effective way to add light automation. This innovative device combines an occupancy sensor with an always-on switch, allowing for seamless lighting control. Enhance your home with the TSOS5 Motion Sensor Switch
Occupancy Sensor
Automatically Turns Lights ON and OFF
By sensing the difference between heat emitted from the human body in motion and background space.
For garages, closets
The Lights Will Remain On
Ideal for use in garages, and other areas that necessitate continuous and precise operation.
Perfect for Studios
Suitable for multimedia environment
The light will not illuminate automatically whether or not the PIR sensor is activated.
Single-Pole Passive Infrared Motion Sensor Switch
This occupancy sensor has a 180-degree field of view; the sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage within a space, motion-activated sensors and variable delay time between 15 seconds, 10 minutes, 20 minutes, and 30 minutes. Neutral wire required.
Perfect for Ventilators
Ideal for Locations with Turbulent Exhaust Airflow
Expanding automation beyond just lighting. Particularly for use in damp and airtight basements.
Ground Wire Required
Ideal for the Home built after the mid-80s
The devices require a neutral wire, enhancing the devices' performance and stability.
Switch the Auto & Manual
The Manual Switch Overrides the Motion Sensor
The manual switch takes precedence over the motion sensor in controlling the device.
Perefect for Pantries
Single-Pole Control
Ideal for environments with limited space and minimal windows or glass.
Auto Mode
Mind Knowing That Your Lights Will Always Turn OFF
Providing simple automation and keeping you 100% hands-free. Add convenience to your daily routine.
Easy to Located
Automatically ON When Load is Off
Avoid fumbling in the dark or entering a room with your hands full searching for the light switch.
Coverage Area 980 sq. ft
Thus Enhancing the Detection of Small Movements
Perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
4-Wire PIR Motion Sensor: Wiring Requirements
1. Sensor wired but not working?
The two most common causes are:
- Cause 1: Reversed Hot/Load. Our sensor has polarity. Your original switch might not. The Hot and Load wires must be correct.
- Cause 2: Misidentified Wires. The Previous installation may not have distinguished Hot from Load. Always use a voltage tester to confirm the Hot wire. Do not trust wire colors alone.
2. KNOB Button
KNOB timer: The pointer must be turned to align exactly with one of the numbered time settings (15s, 10min, 20 min, 30min). If left between two numbers, the timer will not activate. It offers preset timing options only.
KNOB Range: The knob can be set to any position within its range. This allows you to fine-tune the delay time for specific room conditions, such as room size and ambient light.
3. NEUTRAL WIRE MANDATORY This device will ABSOLUTELY NOT function without a neutral wire connection.
TOPGREENER PIR Motion Sensor Selections
 ON/OFF & Motion Sensor |  PIR Motion Sensor |  PIR Motion Sensor |  Multi Functions Sensor |  Dual Tech Sensor Switch |  PIR Motion Sensor | |
|---|---|---|---|---|---|---|
Customer Reviews | — | — | — | — | — | — |
Price | — | — | — | — | — | — |
Circuits | Lights | Lights | Lights | Lights | Lights | Lights |
PIR Motion Sensor Provided For | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF |
Time Delay Effective Position | 15s, & 10, 20, 30 Mins | 15s, & 10, 20, 30 Mins | 15s, & 10, 20, 30 Mins | 15s, & 10, 20, 30 Mins | 15s, & 5, 10, 15, 20, 30 Mins | 15s, & 10, 20, 30 Mins |
Neutral Wire Required | ? | ? | ? | ? | ? | ? |
GrounB08R364D94ire Required | ? | ? | ? | ? | ? | ? |
Feature | Manual ON/OFF | Simply Replace the Switch | For built before the mid-80s | OCCD/OCCS/VACD | Dimmer Function | More stable, less interference |
Warm-Up Required | No | Yes, 1-2 Mins | Yes, 1-2 Mins | Yes, 1-2 MinsB078SKS6LS | Yes, 1-2 Mins | No |
Top Greener, Inc. is comprised of a team of high-tech specialists dedicated to providing innovative and sustainable wiring solutions for residential, commercial, and industrial buildings. Based in Orange County, California, our team specializes in the design and production of high-quality lighting controls, wiring devices, home automation, and smart energy management solutions to better improve the everyday lives of our customers.
See More Product Selection
Topgreener In Wall PIR Motion Sensor Light Switch
A simple yet effective way to add light automation. This innovative device combines an occupancy sensor with an always-on switch, allowing for seamless lighting control. Enhance your home with the TSOS5 Motion Sensor Switch
Occupancy Sensor
Automatically Turns Lights ON and OFF
By sensing the difference between heat emitted from the human body in motion and background space.
For garages, closets
The Lights Will Remain On
Ideal for use in garages, and other areas that necessitate continuous and precise operation.
Perfect for Studios
Suitable for multimedia environment
The light will not illuminate automatically whether or not the PIR sensor is activated.
Single-Pole Passive Infrared Motion Sensor Switch
This occupancy sensor has a 180-degree field of view; the sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage within a space, motion-activated sensors and variable delay time between 15 seconds, 10 minutes, 20 minutes, and 30 minutes. Neutral wire required.
Precision PlR sensor
Customizable controls
Fault tolerance
Daylight detection
Fire-Resistant Box
Perfect for Ventilators
Ideal for Locations with Turbulent Exhaust Airflow
Expanding automation beyond just lighting. Particularly for use in damp and airtight basements.
Ground Wire Required
Ideal for the Home built after the mid-80s
The devices require a neutral wire, enhancing the devices' performance and stability.
Switch the Auto & Manual
The Manual Switch Overrides the Motion Sensor
The manual switch takes precedence over the motion sensor in controlling the device.
Perefect for Pantries
Single-Pole Control
Ideal for environments with limited space and minimal windows or glass.
Auto Mode
Mind Knowing That Your Lights Will Always Turn OFF
Providing simple automation and keeping you 100% hands-free. Add convenience to your daily routine.
Easy to Located
Automatically ON When Load is Off
Avoid fumbling in the dark or entering a room with your hands full searching for the light switch.
Coverage Area 980 sq. ft
Thus Enhancing the Detection of Small Movements
Perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
4-Wire PIR Motion Sensor: Wiring Requirements
1. Sensor wired but not working?
The two most common causes are:
- Cause 1: Reversed Hot/Load. Our sensor has polarity. Your original switch might not. The Hot and Load wires must be correct.
- Cause 2: Misidentified Wires. The Previous installation may not have distinguished Hot from Load. Always use a voltage tester to confirm the Hot wire. Do not trust wire colors alone.
2. KNOB Button
KNOB timer: The pointer must be turned to align exactly with one of the numbered time settings (15s, 10min, 20 min, 30min). If left between two numbers, the timer will not activate. It offers preset timing options only.
KNOB Range: The knob can be set to any position within its range. This allows you to fine-tune the delay time for specific room conditions, such as room size and ambient light.
3. NEUTRAL WIRE MANDATORY This device will ABSOLUTELY NOT function without a neutral wire connection.
TOPGREENER PIR Motion Sensor Selections
ON/OFF & Motion Sensor | PIR Motion Sensor | PIR Motion Sensor | Multi Functions Sensor | Dual Tech Sensor Switch | PIR Motion Sensor |
|---|---|---|---|---|---|
| Customer Reviews | |||||
| — | — | — | — | — | — |
| Price | |||||
| — | — | — | — | — | — |
| Circuits | |||||
| Lights | Lights | Lights | Lights | Lights | Lights |
| PIR Motion Sensor Provided For | |||||
| Auto ON/OFF | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF | Auto ON/OFF |
| Time Delay Effective Position | |||||
| 15s, & 10, 20, 30 Mins | 15s, & 10, 20, 30 Mins | 15s, & 10, 20, 30 Mins | 15s, & 10, 20, 30 Mins | 15s, & 5, 10, 15, 20, 30 Mins | 15s, & 10, 20, 30 Mins |
| Neutral Wire Required | |||||
| ? | ? | ? | ? | ? | ? |
| GrounB08R364D94ire Required | |||||
| ? | ? | ? | ? | ? | ? |
| Feature | |||||
| Manual ON/OFF | Simply Replace the Switch | For built before the mid-80s | OCCD/OCCS/VACD | Dimmer Function | More stable, less interference |
| Warm-Up Required | |||||
| No | Yes, 1-2 Mins | Yes, 1-2 Mins | Yes, 1-2 MinsB078SKS6LS | Yes, 1-2 Mins | No |
Top Greener, Inc. is comprised of a team of high-tech specialists dedicated to providing innovative and sustainable wiring solutions for residential, commercial, and industrial buildings. Based in Orange County, California, our team specializes in the design and production of high-quality lighting controls, wiring devices, home automation, and smart energy management solutions to better improve the everyday lives of our customers.
See More Product Selection