Let There Be Light
With light bulb socket extender, you can adjust the height to reach brighter light as your need
4-Level Lengths Adjustable
4 levels allow you to adjust the length of the socket adapter with each level measuring 0.3"(0.7cm), and the total extension length is 1.0"(2.6cm).
Good electrical conductivity
The E26/E27 light bulb socket is made of durable metal with good electrical conductivity. Use this lamp socket for voltage range: 100-250V.
Easy Installation
With just a slight twist, you can extend the bulb and increase the brightness, which is the convenient first choice for light bulb extender!
Safety Fireproof Material
The PBT fireproof material ensures your safety during use, heat-resistant up to 392?(200?). And, please use this lamp holder in a dry environment.
Just What You Need
JACKYLED Light Socket Extender for Any E26/E27 Bulbs
This light bulb extension socket is suitable for any E26 medium base light bulbs like LED bulbs, incandescent bulbs, halogen Bulbs, fluorescent light bulbs, etc.
(Note: For safe use, the bulb's max wattage should not exceed 60w.)
Add So Much More Bright in Your Room!
- This product is ideal for any occasion, if you want to extend your socket light and increase the brightness of the space, this is the best choice.
- Perfect for the garage, bedroom, living room, conference room, kitchen, living room, hall, telephone booths, workshops, and exhibitions, etc.
NOTE:
- The adapter will increase the length of the socket by 3.1"-4.3" (8cm-11cm), please check if this is the length required for your light fixture before purchasing.
- What may probably cause the light socket(s) to not work? And what should I do if it happens? (Troubleshooting)
- You may have forgotten to turn on the switch - you need to turn the switch on.
- The bottom of the bulb you are using is too large to be screwed into the socket further - you need to replace it with a smaller bulb at the bottom.
- It may be caused by poor contact between the copper sheet and the bulb in the socket- you just need to use a small tweezers to gently raise the copper piece of the socket a certain angle to contact.
- The product is defective - It's rare to happen because our experts always have a strict quality inspection. If it happens, please let us know.
Let There Be Light
With light bulb socket extender, you can adjust the height to reach brighter light as your need
4-Level Lengths Adjustable
4 levels allow you to adjust the length of the socket adapter with each level measuring 0.3"(0.7cm), and the total extension length is 1.0"(2.6cm).
Good electrical conductivity
The E26/E27 light bulb socket is made of durable metal with good electrical conductivity. Use this lamp socket for voltage range: 100-250V.
Easy Installation
With just a slight twist, you can extend the bulb and increase the brightness, which is the convenient first choice for light bulb extender!
Safety Fireproof Material
The PBT fireproof material ensures your safety during use, heat-resistant up to 392?(200?). And, please use this lamp holder in a dry environment.
Just What You Need
JACKYLED Light Socket Extender for Any E26/E27 Bulbs
This light bulb extension socket is suitable for any E26 medium base light bulbs like LED bulbs, incandescent bulbs, halogen Bulbs, fluorescent light bulbs, etc.
(Note: For safe use, the bulb's max wattage should not exceed 60w.)
Add So Much More Bright in Your Room!
- This product is ideal for any occasion, if you want to extend your socket light and increase the brightness of the space, this is the best choice.
- Perfect for the garage, bedroom, living room, conference room, kitchen, living room, hall, telephone booths, workshops, and exhibitions, etc.
NOTE:
- The adapter will increase the length of the socket by 3.1"-4.3" (8cm-11cm), please check if this is the length required for your light fixture before purchasing.
- What may probably cause the light socket(s) to not work? And what should I do if it happens? (Troubleshooting)
- You may have forgotten to turn on the switch - you need to turn the switch on.
- The bottom of the bulb you are using is too large to be screwed into the socket further - you need to replace it with a smaller bulb at the bottom.
- It may be caused by poor contact between the copper sheet and the bulb in the socket- you just need to use a small tweezers to gently raise the copper piece of the socket a certain angle to contact.
- The product is defective - It's rare to happen because our experts always have a strict quality inspection. If it happens, please let us know.
JACKYLED
Unleash Your Possibilities in Nightlife
More Bulb Adapters & Sockets
T8 Lamp Holder
Spiral GU24 CFL Light Bulbs
Pendant Light Kit
Extension Cord
