Where to connect the anti-siphon? Also does it matter if it is higher or lower then the water supply?
Regarding the installation of the anti-siphon accessory, please note that it needs to be installed at the outlet. It's important that the accessory is positioned above the water level during actual use to prevent leakage and over-irrigation.
Humidity electrodes not working, what should I do?
Check whether probe can work: 1.Place probe into water under humidity mode; 2. Set current time and first watering time(1 min later is advised); 3. Wait for 1 min, device starts working, check if there is "WET" on screen. If not, probe is faulty.
What should I do if the watering system stops working suddenly?
Check if the device is out of battery and charge it. If the device does not charge using the included power cable, try using a different Type-C cable. If the issue persists, please contact Beday service
What should I do if some plants need more water while some need less water, while they are watered at the same time
You can choose to insert more watering spikes in this plant, so that this plant can get more water at one time of watering. If there are many plants that need less watering and many plants that need more watering, get 2 sets is advised.
The battery indicator stays the same and doesn’t move while charging. What should I do if it won’t charge?
This issue is caused by a charging protocol problem, which has now been resolved. If you are facing this issue, maybe you have got an older version. The apple adapter and C-C cable can't work, you can try a different adapter and USB-C cable.
We're constantly exploring and incorporating fresh design concepts and technologies to meet our customers' ever-evolving needs. Whether you're on the go or at home, we strive to deliver an experience that's comfortable, convenient, and caring.
Thank you for choosing Beday. Let's enjoy the pleasures of comfortable living together!
Auto Plant Waterer Indoor
Solar Auto Irrigation System
Where to connect the anti-siphon? Also does it matter if it is higher or lower then the water supply?
Regarding the installation of the anti-siphon accessory, please note that it needs to be installed at the outlet. It's important that the accessory is positioned above the water level during actual use to prevent leakage and over-irrigation.
Humidity electrodes not working, what should I do?
Check whether probe can work: 1.Place probe into water under humidity mode; 2. Set current time and first watering time(1 min later is advised); 3. Wait for 1 min, device starts working, check if there is "WET" on screen. If not, probe is faulty.
What should I do if the watering system stops working suddenly?
Check if the device is out of battery and charge it. If the device does not charge using the included power cable, try using a different Type-C cable. If the issue persists, please contact Beday service
What should I do if some plants need more water while some need less water, while they are watered at the same time
You can choose to insert more watering spikes in this plant, so that this plant can get more water at one time of watering. If there are many plants that need less watering and many plants that need more watering, get 2 sets is advised.
The battery indicator stays the same and doesn’t move while charging. What should I do if it won’t charge?
This issue is caused by a charging protocol problem, which has now been resolved. If you are facing this issue, maybe you have got an older version. The apple adapter and C-C cable can't work, you can try a different adapter and USB-C cable.
We're constantly exploring and incorporating fresh design concepts and technologies to meet our customers' ever-evolving needs. Whether you're on the go or at home, we strive to deliver an experience that's comfortable, convenient, and caring.
Thank you for choosing Beday. Let's enjoy the pleasures of comfortable living together!
Auto Plant Waterer Indoor
Solar Auto Irrigation System