here!
I’m your shopping assistant for PC builds, upgrades, and everything tech.
Got questions? Ask away!
Start a conversation
- Free 45-day Returns
$15.99
Ships from China.
Meet Your Seller
4 Channel Industrial PWM Fan Hub Controller, 6Pin Heavy Duty Module for 3Pin 4Pin High Speed Fans with Smart Speed Adjustment
- 1) Control Up to 4 Fans from One Hub
- Manage four fans at once from a single PWM controller useful when your motherboard does not have enough fan headers, or when you want one knob to set the tone for the whole case.
- 2) Works with 3-Pin and 4-Pin Fans
- Each channel accepts common 3-pin DC and 4-pin PWM PC fans, so you can mix older and newer fans on the same hub without hunting for adapters.
- 3) Simple Manual Speed Control
- Turn the built-in knob to raise or lower fan speed. No software install, no RGB app adjust airflow and noise the moment you build or tune the system.
- 4) 12V / 2A Power Budget for Real Builds
- Rated 12V DC, max output 12V / 2A, working current about 12V / 50 mA (controller itself). The 6-pin power input is designed to feed multiple case fans from your PSU-side power path (confirm your cable/connector before purchase).
- 5) Compact PCB, Screw-Mountable
- Board size about 9 × 5 cm with 4 mounting holes lay it flat, screw it to a panel, or fix it inside an enclosure. Fits tidy builds where a large fan controller bay is overkill.
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
One knob. Four fans. Cleaner case wiring.
This 4-channel PWM fan hub lets you run up to four case fans from a single controller with a manual speed knob. It is built for everyday desktop builds, workshop PCs, and anyone who wants fan control without motherboard software or a full front-panel controller.
What you get
- 4 fan channels on one compact board
- Support for 3-pin and 4-pin fans
- 12V / 2A max output · 6-pin power connector
- Controller draw about 50 mA @ 12V
- ~9 × 5 cm PCB · 4 screw holes for permanent mounting
- Knob-based speed adjustment (PWM control path)
Good fit when
- Your motherboard has too few fan headers
- You want one control point for intake + exhaust fans
- You need a small, screw-down hub instead of a bulky bay controller
- You mix old 3-pin and new 4-pin fans
Before you buy
- Confirm your power source can feed the hubs 6-pin input at 12V.
- Check total fan current stays within 2A at 12V.
- This is a manual knob controller not a software/RGB ecosystem product.
- Mounting screws for the PCB holes are not described as included in every pack verify package contents if you plan to hard-mount.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 45 days
- Return for replacement within: 30 days
- This item is covered by PeakCircuit Technology Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...