Meet Your Seller
Motion Sensor LED Light Bulb 9W A19 900 Lumens E26 Warm White 4 Packs | PIR Built-in IR 60W Equivalent Movement Sensitive Sensor Energy Saving Basement Stairs Patio Corridor Indoor Outdoor
- 60-SECOND POWER-ON TESTWhen the power is switched on, the HEKEE motion sensor light bulbs lights up for approximately 60 seconds, whether it is day or night. It then changes to low-light PIR motion-sensing mode.For this motion sensor led light bulb, the initial 60-second light-up is normal operation, not a fault.
- LOW-LIGHT AND PIR MOTION ACTIVATION After the initial 60-second power-on period, the motion sensor light bulb turns on only when both conditions are met: ambient light is below approximately 10 lux and human or animal movement is detected within the sensing range. In daylight or bright rooms above 10 lux, it stays off by design, not because of a fault.
- PASSIVE INFRARED PIR TECHNOLOGYThe HEKEE motion light bulbs uses dual-probe PIR sensing to detect people or pets in low light, with an approximate range of 9-20 feet depending on installation height and surroundings. PIR sensing cannot work through glass, so do not install it behind a glass shade or enclosed glass cover. Ideal for stairs, hallways, porches, garages and entrance areas.
- STAY-ON This motion sensor outdoor light bulb keeps checking for movement while you are in the sensing area. As long as you keep moving, the light stays on, helping avoid sudden darkness on stairs, in bathrooms or storage rooms. After the last detected movement, it turns off after about 30 seconds. The 30-second delay is fixed and cannot be adjusted.
Any questions? Ask CelesteSM will help you find out quickly.
NOTE:
- This PIR motion sensor light bulb CAN NOT work through glass or any lamp covers, as the bulb top must be completely exposed.
-The bulb should be installed downward and no higher than 13 feet, or the sensor will not work.
-Stay away from places where there is direct sunshine, air conditioner, dryer, heater or strong electromagnetic wave, so as to avoid interference.
-If intend to use the bulb for outdoor fixtures, please find a way to protect it from water yet no blocking the sensor parts on the top of bulb.
-Supports only normal switch and should always be turned on switch, and other switches like sound and light control switches, human body touch switches, human body sensor switches, sound and light control lamp Stand DO NOT work with the motion bulb.
-Please DO NOT make purchase if fail to agree with the above instructions! Feel free to contact us if not quite sure.
Specification:
Wattage: 9W
Detection distance: 9-20 feet
Shut down delay: 30 seconds
Features:
Reacts only to human or animal motion.
Light off delay down to 30 seconds to meet our actual needs.
Continuous movement keeps the light always on.
FAQ
-Q: Can not light after installing?
A: The bulb only lights when the brightness is lower than 10 LUX AND someone passing by.
-Q: Can not light after driving car into garage, Is this bulb defective?
A: Radar sensor bulb is better, while the PIR senser bulb can light only when the people get off the car.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by YOUCAILI Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















