Product Parameters
Product Name: 4 Zone Single Color or CCT Panel Remote
Controller Model No: WR02RF
Working Voltage: 3V (2*AAA Battery) (Package Not Including
Battery )
Transmitting: 6dBm
Standby Power: 20uA
Transmission Frequency: 2.4GH z
Modulation Method: GFSK
Control Distance: 30cm ( 98.42 ft)
Working Temperature: -20-60°C
Size: 86*86*19mm ( 33.86 * 33.86 * 7.5 in)
Support Controller: C01RF, C01W, C02RF, C02W, WB5, LM052, LM053. Link /
Unlink Link Instructions: Disconnect the LED controller from the power supply for 10 seconds and reconnect it. When the light on, short press any zone of " " 3 times within 3 seconds. The LED Strip blink 3 times slowly means the linking is successful.
Note: Linking failed if light is not blinking slowly, Please follow above steps again(
Note: Light that have linked cant link again).
Unlinking Instructions: Disconnect the LED controller from the power supply for 10 seconds and reconnect it. When the light is on, short press the been connected " zone 5 times within 3 seconds. (Unlinking must be the same zone with the Linking) The LED strip blinks 10 times quickly means the unlinking is successful.
Note: Unlinking failed if light is not blinking quickly, Please follow above steps again(
Note: Light haven't linked that don't need to unlink).
Attention: Please check the cable, and make the circuit is correct before when power on. When installation, please handle with the care to avoid the broken of the glass panel. Please don't use the lighting