Instructions for Use
Step 1
Place the Desoldering Wick on the Solder Joint and heat it with the Soldering Iron Tip so that the Wick fully absorbs the heat from the Solder Joint.
Step 2
Once the excess Solder has been absorbed, remove the Soldering Iron and the Soldering Wick at the same time.
Step 3
Cut off the used Solder Wick with Side Cutters.
Solder Wick Product information:
Instructions for Use
Step 1
Place the Desoldering Wick on the Solder Joint and heat it with the Soldering Iron Tip so that the Wick fully absorbs the heat from the Solder Joint.
Step 2
Once the excess Solder has been absorbed, remove the Soldering Iron and the Soldering Wick at the same time.
Step 3
Cut off the used Solder Wick with Side Cutters.
Solder Wick Product information:
| Brand Name: | TANG HONG |
| Product Name: | Desoldering wick |
| Model: | TH-2530 |
| Material: | Copper/Flux |
| WID: | 0.1In |
| Length: | 10Ft |
| Type: | Desoldering Item |
| Application: | Remover Solder, Disassemble Electrical Components |
| Usage: | Desoldering |
| Batteries Required?: | No |
| Batteries Included?: | No |
| Shelf Life: | 3 Years |