FCOB COB LED Strip Flexible High Density Uniform Light 9W/m 16.4FT DC24V Warm White 3000K CRI 90+ 8mm Width Dimmable LED Ribbon for Indoor Decoration(No Adapter or Controller)

Ultra Bright and UniformDC24V 480LEDs/m 16.4FT Warm White 3000K FCOB COB LED Strip. Flip Chip On Board LED strip (FCOB). Adopting high brightness LED as the light source to ensure the brightness while maintaining color consistency. Compared with traditional 5050SMD 3528SMD light strips FCOB COB LED strip dense light-emitting units create a brighter softer spotless and more uniform light avoiding black in the middle area. CRI 90+Universal CompatiblityOur FCOB LED strip is compatible with most dimmers using standard control protocols including ELV TRIAC DMX Dali 0-10V RF. Such as C01RF+RC01RFB controller kitRF 14Keys WB5 LM052 LM053 SP630E+RB1 controller kit SP530E and so on.

(Controller Sold Separately) Shopping With ConfidenceAdopting real double-layer copper PCB board better electronic conductivity and heat dissipation. More than 65 000 hours lifespan. We also provide 24/7 customer service. For troubleshooting and replacement or any questions about purchase or installation please feel free to contact us. Cuttable and LinkableOur FCOB light strip is soft and flexible. The Spots to solder can be cut. Two 5.5 mmx 2.1 mm DC Plugs on two ends one is female the other one is male. It also support end to end connect in series. 8mm width.

Wide ApplicationOur FCOB LED light is perfect for various interior decoration. Such as living room hallway bedroom kitchen accent lighting cabinet lighting stair mirror corridor DIY backlight DIY lighting special use and other commercial and residential lighting projects. Come with a strong self adhesive backing.
Tips: Before installation please thoroughly clean and dry the installation surfacePackage included 1X 16.4FT COB LED light (No Power Supply or Controller) 2X Non-Wired Gapless Solderless Connector 3X LED Strip fixed Clips 1X 20AWG 20AWG Extension Wires 1XUser manual. Two ends wire connector can be used for Extending your FCOB strip light Splicing corner connection connecting the power supply directly. Power calculationThe actual power of 16.4FT FCOB COB LED strip will be affected by the voltage drop. For example the power of DC24V 16.4FT 480LEDs /m is 32W not 9W/mx5m= 45W. The calculation method of 45W is wrong and the voltage drop should be considered. AttentionPlease note that accessories recommended by system in the Frequently Bought Together box may not be accurate. Please double check the light specifications to ensure that the items you are buying together are compatible.