COB LED Strip Light Warm White 3000K 32.8ft Dimmable Bright 24V Led Tape Light with RF Remote Indoor COB Led Lights for Bedroom Kitchen Under Cabinet DIY Lighting 1 Rolls of 32.8ft

Ultra Bright Uniform light: 1 Rolls of 32.8 ft/3240 3000K Dimmable COB LED strip light can provide higher brightness and continuous linear light. CRI>90 colors are rich and the restoration is strong. The light strip cover yellow odorless and safe silicone material makes light strips more uniform and bright comfortable and soft.
Dimmable Lighting: Comes with RF Remote and controller (receiver) it has memory function. 3 timing functions (10min/30min/60min) can make the strip light to turn off at the set time. brightness increase/decrease (6 levels) and 4-fixed brightness levels (10%/25%/50%/100%)3 modes (jump gradient flicker).
Easy to DIY: Flexible and cuttable COB light strip can be bent at any angle and thus adapt to your devices to a large extent. The cutting functions give you great flexibility to achieve the length and shape you want. The middle of the metal point on the strip light is a cutting mark (one cutting unit every 50mm/ 1.97 inches) and the cut strip light can also be reconnected which is very convenient for DIY!
Easy Installation & Widely Use: Very Simple installation. Just connect the parts and install to where you want. Flexible COB light strip with strong adhesive tape makes it easy to stick on clean dry surface also you can install it with screws (included). LED light strip and the width is 8mm allowing you to fit it into very tight places! Perfect for decoration in kitchen bedroom cabinets shelves display case stairs mirror hallway DIY backlight and other places needed.
All in One Kit: Includes 32.8 ft 24V COB LED strip light 3000K warm white RF remote control controller FCC Listed DC 24V 24W power supply COB led strip connectors 2Pin 8mm strip & wire led strip connector 2Pin 8mm mounting brackets. You don't need to spend extra time and money buying other accessories.
Tips: 1. The red & black wire at the end of the strip is convenient for you to connect the DC connector so that you can power at both ends when you add longer strips in the kit! 2. The 24W power supply in the kit is just enough for the strip light in the kit use. You must replace it with a higher output 24V power supply if the total length of the strip light exceeds 32.8 ft.