Narrow PCB 5mm WidthThe width of this COB light strip is only 5mm while the width of ordinary COB light strip is 8mm. Compared with the general 8mm COB strip the narrower 5mm allows you to install more easily suitable for narrow spaces. CuttableThe strip can be cut once every 1cm/ 0.39 in the accuracy is higher than the ordinary strip the cutting point of the strip is on the back of the plate you need to tear off the double-sided tape to see. Uniform light emission The COB technology enables a much higher packing density of the LED array No dark spots Higher luminous efficacy Higher CRI (90+).
The COB LED light strip emits uniformly and softly without ultraviolet rays and is comfortable and soft. (Without power supply) High brightness High density 400LED/M 2000LED/5M COB LED strips can achieve a brightness of 3000lm 180° beam angle design for 50% wider lighting multiple chips on board for uniform illumination no more worries about dark spot! Widely applicationIt comes with double-sided tape which can be attached to any dry and flat surface without screws. Suitable for indoor decoration. Such as kitchen closet bedroom stairs mirror corridor diy backlight table lamp toy light diy lighting special use and other lighting.