Skip to main content
  • $377.99
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    100/1000Base-T1-TX-L Automotive Ethernet Media Converter 1Gbps Full-Duplex Gigabit T1 to RJ45, 88Q2112&RTL8211FI, Aluminum Alloy Case,TE MATEnet & H-MTD Adapter Boards,Industrial Grade

    • True Gigabit Automotive Ethernet Bridge: Bidirectional 100/1000BASE-T1 100/1000BASE-TX conversion with zero packet loss, ultra-low latency and full line-rate 1 Gbps full-duplex performance using proven Marvell 88Q2112 (T1) + Realtek RTL8211FI (TX) PHYs
    • Complete Connectivity Kit: Includes both TE MATEnet and Rosenberger H-MTD adapter boards + 1.5 m RJ45 cable instantly compatible with all common automotive T1 headers for rapid prototyping, diagnostics (DoIP), and in-vehicle testing
    • Premium Industrial Build: CNC-machined sandblasted aluminum alloy enclosure (103 × 71 × 26 mm), -40°C to +85°C operation, AEC-Q100 qualified chips, OPEN Alliance TC10 EMI filtering, over-voltage/over-current/ESD protection and vibration-resistant design
    +
    +
    Overview
    Reviews

    Any questions? Ask CelesteSM will help you find out quickly.

    Smart Features & Visual Feedback: Automatic master/slave switching, onboard MCU for future firmware upgrades, rich status LEDs (link/activity/speed/master-slave/SQI), dual power input (USB-C PD + 5.5 mm DC jack 536 V), low-ripple regulation
    Advanced Network Support: IEEE 802.3bw/802.3ab compliant, VLAN tagging (802.1Q), QoS prioritization, perfect for ADAS camera/radar development, zonal architecture testing, ECU flashing, lab benches, and fleet diagnostics

    - Converts automotive single-pair Ethernet to standard RJ45 in either direction at full Gigabit, zero packet loss.


    - Marvell 88Q2112 (AEC-Q100) on T1 + Realtek RTL8211FI on TX proven, field-tested PHY pairing.


    - 15EDGK 3.81 mm 2-pin terminal block exposes the T1 differential pair for direct lab probing.


    - Ships with TE Mate-NET adapter board AND HMTD adapter board covers all common automotive headers.


    - Dual power: USB Type-C 5V/2A or DC jack 5.5×2.1 mm 536 V (12V/1A adapter included).


    - CNC sandblasted aluminum, 103×71×26 mm, 0.2 kg, industrial 40°C to +85°C operating range.


    - USB Type-C 5V/2A input phone-charger compatible for laptop, bench, or portable diagnostic kits.


    - DC jack 5.5×2.1 mm with wide-range 536 V regulator accepts 12V/24V vehicle rails directly.


    - 12V / 1A DC adapter included in the box ready to plug in out of the box.


    - 2-bit DIP switch sets master/slave role and 100M/1Gbps speed; onboard MCU auto-resets the link on change.


    - Dedicated T1 status LED confirms link state at a glance during back-to-back pairing.


    - 15EDGK 3.81 mm 2-pin screw terminal exposes TRX± directly wire any unterminated automotive pair.


    - SQI signal-quality LED: solid = full strength, duty cycle reflects link quality during operation.


    - Activity LED flashes Rx/Tx traffic so you see data movement without opening Wireshark.


    - RJ45 port is full 100/1000Base-TX with auto-negotiation on Realtek RTL8211FI.


    - Integrated link and speed indicators on the RJ45 jack no extra software needed.


    - Marvell 88Q2112 T1 PHY is AEC-Q100 qualified with OPEN Alliance TC10-compliant EMI filter.


    - Realtek RTL8211FI on the TX side proven Gigabit RJ45 PHY with full auto-negotiation.


    - CNC-machined sandblasted aluminum enclosure: 103 × 71 × 26 mm, only 0.2 kg.


    - Industrial 40°C to +85°C operating range for vehicles, factories, and outdoor installations.


    - ESD, over-voltage, and over-current protection exceeds standard automotive baseline requirements.


    - Interoperable with NXP, TI, Broadcom, Marvell, and Realtek T1 PHYs in mixed-vendor networks.


    - 1× converter + 1× 12V/1A DC adapter + 1× 1.5 m RJ45 Cat-5e+ cable in the box.


    - 1× 15EDG 3.81 mm screw-terminal plug for direct twisted-pair wiring.


    - 1× TE Mate-NET adapter (TE 2304372-1) + 1× HMTD adapter (E6S20A-40MT5-Z) for production headers.


    - Pair two units head-to-head as a complete back-to-back master/slave T1 link.


    - Driver-free plug-and-play on Windows, Linux, macOS works with PCs, Raspberry Pi 5, Jetson Nano.


    - Hands-on automotive Ethernet labs, ADAS camera bridging, ECU validation, in-vehicle traffic capture.


    - IEEE 802.3bw (100BASE-T1)/IEEE 802.3bp(1000BASE-T1) and IEEE 802.3ab (1000BASE-T) compliant on both sides.


    - 100 / 1000 Mbps full-duplex with auto-negotiation on the RJ45 side.


    - Power inputs: USB Type-C 5V/2A and DC jack 5.5×2.1 mm with 536 V wide-range regulation.


    - T1 connector: 15EDGK 3.81 mm 2-pin terminal block (TRX±); RJ45 100/1000Base-TX with link/speed LEDs.


    - CNC sandblasted aluminum enclosure, 103×71×26 mm, 0.2 kg, industrial 40°C to +85°C range.


    - Driver-free on Windows, Linux, macOS compatible with PC, Raspberry Pi, Jetson Nano, ARM SBCs.



    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...