- Free 30-day Returns
Meet Your Seller
100/1000Base-T1-TX-L Automotive Ethernet Media Converter 1Gbps Full-Duplex Gigabit T1 to RJ45, 88Q2112&RTL8211FI, Aluminum Alloy Case,TE MATEnet & H-MTD Adapter Boards,Industrial Grade
- True Gigabit Automotive Ethernet Bridge: Bidirectional 100/1000BASE-T1 100/1000BASE-TX conversion with zero packet loss, ultra-low latency and full line-rate 1 Gbps full-duplex performance using proven Marvell 88Q2112 (T1) + Realtek RTL8211FI (TX) PHYs
- Complete Connectivity Kit: Includes both TE MATEnet and Rosenberger H-MTD adapter boards + 1.5 m RJ45 cable instantly compatible with all common automotive T1 headers for rapid prototyping, diagnostics (DoIP), and in-vehicle testing
- Premium Industrial Build: CNC-machined sandblasted aluminum alloy enclosure (103 × 71 × 26 mm), -40°C to +85°C operation, AEC-Q100 qualified chips, OPEN Alliance TC10 EMI filtering, over-voltage/over-current/ESD protection and vibration-resistant design
Any questions? Ask CelesteSM will help you find out quickly.
Advanced Network Support: IEEE 802.3bw/802.3ab compliant, VLAN tagging (802.1Q), QoS prioritization, perfect for ADAS camera/radar development, zonal architecture testing, ECU flashing, lab benches, and fleet diagnostics
- Converts automotive single-pair Ethernet to standard RJ45 in either direction at full Gigabit, zero packet loss.
- Marvell 88Q2112 (AEC-Q100) on T1 + Realtek RTL8211FI on TX proven, field-tested PHY pairing.
- 15EDGK 3.81 mm 2-pin terminal block exposes the T1 differential pair for direct lab probing.
- Ships with TE Mate-NET adapter board AND HMTD adapter board covers all common automotive headers.
- Dual power: USB Type-C 5V/2A or DC jack 5.5×2.1 mm 536 V (12V/1A adapter included).
- CNC sandblasted aluminum, 103×71×26 mm, 0.2 kg, industrial 40°C to +85°C operating range.
- USB Type-C 5V/2A input phone-charger compatible for laptop, bench, or portable diagnostic kits.
- DC jack 5.5×2.1 mm with wide-range 536 V regulator accepts 12V/24V vehicle rails directly.
- 12V / 1A DC adapter included in the box ready to plug in out of the box.
- 2-bit DIP switch sets master/slave role and 100M/1Gbps speed; onboard MCU auto-resets the link on change.
- Dedicated T1 status LED confirms link state at a glance during back-to-back pairing.
- 15EDGK 3.81 mm 2-pin screw terminal exposes TRX± directly wire any unterminated automotive pair.
- SQI signal-quality LED: solid = full strength, duty cycle reflects link quality during operation.
- Activity LED flashes Rx/Tx traffic so you see data movement without opening Wireshark.
- RJ45 port is full 100/1000Base-TX with auto-negotiation on Realtek RTL8211FI.
- Integrated link and speed indicators on the RJ45 jack no extra software needed.
- Marvell 88Q2112 T1 PHY is AEC-Q100 qualified with OPEN Alliance TC10-compliant EMI filter.
- Realtek RTL8211FI on the TX side proven Gigabit RJ45 PHY with full auto-negotiation.
- CNC-machined sandblasted aluminum enclosure: 103 × 71 × 26 mm, only 0.2 kg.
- Industrial 40°C to +85°C operating range for vehicles, factories, and outdoor installations.
- ESD, over-voltage, and over-current protection exceeds standard automotive baseline requirements.
- Interoperable with NXP, TI, Broadcom, Marvell, and Realtek T1 PHYs in mixed-vendor networks.
- 1× converter + 1× 12V/1A DC adapter + 1× 1.5 m RJ45 Cat-5e+ cable in the box.
- 1× 15EDG 3.81 mm screw-terminal plug for direct twisted-pair wiring.
- 1× TE Mate-NET adapter (TE 2304372-1) + 1× HMTD adapter (E6S20A-40MT5-Z) for production headers.
- Pair two units head-to-head as a complete back-to-back master/slave T1 link.
- Driver-free plug-and-play on Windows, Linux, macOS works with PCs, Raspberry Pi 5, Jetson Nano.
- Hands-on automotive Ethernet labs, ADAS camera bridging, ECU validation, in-vehicle traffic capture.
- IEEE 802.3bw (100BASE-T1)/IEEE 802.3bp(1000BASE-T1) and IEEE 802.3ab (1000BASE-T) compliant on both sides.
- 100 / 1000 Mbps full-duplex with auto-negotiation on the RJ45 side.
- Power inputs: USB Type-C 5V/2A and DC jack 5.5×2.1 mm with 536 V wide-range regulation.
- T1 connector: 15EDGK 3.81 mm 2-pin terminal block (TRX±); RJ45 100/1000Base-TX with link/speed LEDs.
- CNC sandblasted aluminum enclosure, 103×71×26 mm, 0.2 kg, industrial 40°C to +85°C range.
- Driver-free on Windows, Linux, macOS compatible with PC, Raspberry Pi, Jetson Nano, ARM SBCs.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Group Can Trading Limited Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory















