Intellinet 8-Port Industrial Gigabit Switch, 2 SFP, DIN-Rail Mount, IP40

Connect networked equipment through eight auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, with auto-MDIX and NWay auto-negotiation to match speed, duplex and cable configuration; two SFP slots add fiber uplink options for longer-distance links.
Install this unmanaged switch in industrial network cabinets using the included DIN-rail mount bracket; the IP40-rated metal housing measures 7.48 x 3.94 x 1.1 inches and supports operation from -40 to 167°F for demanding sites.
Use two redundant 1248V DC inputs with the I/O terminal block to support industrial power setups; a one-way power-failure relay alarm, rated 1 A at 24V DC, provides status notification when input power is lost during network operation.
Manage traffic with a 20 Gbps switching capacity, store-and-forward architecture, 1.75 Mbit buffer memory, 4K MAC address table with auto-learning and auto-aging, and jumbo-frame support up to 9.6 KB for connected devices in control systems.
Protect connected equipment with port surge protection up to 6 kV and a grounding point; the switch is rated for shock, freefall and vibration under IEC 60068-2-27, IEC 60068-2-32 and IEC 60068-2-6 test methods for industrial installation.
Apply IEEE 802.1x port-based security while monitoring power, link/activity and SFP status through LEDs; full- and half-duplex operation plus IEEE 802.3x flow control support varied Ethernet connections in industrial networks.
Deploy the unmanaged switch in IoT, Industry 4.0 or factory automation networks; it supports 595% non-condensing operating humidity, has 7.44-watt maximum power consumption, and requires an additional 1248V DC industrial power supply, not included.