Intellinet Outdoor Gigabit Media Converter PoE+ Injector, IP67 IK10

Converts copper Ethernet to fiber while adding PoE+ power in one outdoor unit, helping extend or expand a network without adding routers and supporting transparent operation across copper and fiber media.
Includes one 10/100/1000 RJ45 port for Ethernet runs up to 300 ft. and one 1000Base-X SFP slot for optical transceiver modules, with fiber links reaching up to 75 miles depending on the module used.
Delivers up to 30 W PoE+ output to IEEE 802.3at/af compliant powered devices such as network cameras, wireless access points and VoIP phones, with auto-sensing that sends power only to compatible PoE devices.
Built for exposed installations with an IP67 dustproof and waterproof housing plus IK10 vandal resistance, making it suitable for demanding outdoor locations and operating temperatures from -4 to 140 degrees F.
Helps protect connected equipment with short-circuit, overload and high-voltage protection, plus PoE surge protection up to 6 kV common mode and 4 kV differential mode and ESD protection up to 8 kV air and 6 kV contact.
Supports Gigabit data rates up to 1000 Mbps with store-and-forward switching, a 2K MAC address table, 802.3x flow control for full duplex and collision-based backpressure for half duplex operation.
Designed for straightforward setup with plug-and-play operation, wall-mount holes, a grounding point, and included accessories: power cable, earthing kit, three IP67-rated cable glands, wrench, tweezer and instructions.