Intellinet Outdoor Gigabit PoE++ Injector, 60W, IP67, IK10, 1-Port

Add PoE power and Gigabit data to a non-PoE switch port with this 1-port injector, delivering up to 60 W over one Ethernet cable to compatible devices up to 328 ft. away while supporting 10/100/1000 Mbps network speeds.
Built for exposed installations, the metal housing is rated IP67 for dustproof and waterproof protection and IK10 for vandal resistance, with operating temperatures from -40 to 167°F for dependable use in demanding outdoor environments.
Works with IEEE 802.3bt, 802.3at and 802.3af powered devices including network cameras, wireless access points and VoIP phones, making it a practical way to connect higher-power PoE equipment where only a standard LAN port is available.
Plug-and-play design requires no software or configuration, and auto-sensing PoE detects compliant devices before sending power so non-PoE equipment receives data only, helping simplify mixed-network deployments and reducing setup complexity.
Protective features include short-circuit, overload and high-voltage protection, plus a grounding point for external electrical surges, port surge protection up to 6 kV, and ESD protection up to 8 kV air and 6 kV contact.
Designed for industrial and outdoor mounting, it includes wall-mounting holes, a mounting kit, an earthing kit and three IP67-rated cable glands, helping create a sealed installation around the 1 RJ45 data input and 1 RJ45 PoE output ports.
This 4PPoE injector uses an RJ45 PoE output and a 2-pin terminal block power input, with a compact 5.9 x 2.9 x 1.73 in. body and ratings for shock, freefall and vibration under IEC 60068 test methods for added installation confidence.