Intellinet 10G PoE++ Injector, 95W, IEEE 802.3bt, Wall Mountable

Add PoE power to a non-PoE switch port while keeping high-speed data on the same cable. This injector delivers up to 95 watts to IEEE 802.3bt, 802.3at and 802.3af powered devices over runs up to 328 ft. using existing network cabling.
Supports 10GBASE-T networking through one RJ45 data input and one RJ45 PoE plus data output. Handles 10, 100, 1000, 2.5G, 5G and 10G speeds, with Cat6 or Cat6a required for 10Gbps connections to compatible devices and infrastructure.
Built for demanding PoE applications such as motorized IP cameras, wireless access points, VoIP phones, thin clients, point-of-sale systems, lighting controllers and digital signage that need both network connectivity and higher power delivery.
A front-panel slide switch lets you choose 802.3bt, UPoE or Legacy 802.3bt mode for the connected powered device. Plug-and-play setup means no software or configuration steps, making it easy to add PoE where only data is available.
Auto-sensing PoE sends power only to compliant IEEE 802.3bt, 802.3at and 802.3af devices, while non-PoE equipment receives data only. Built-in short-circuit, overload and high-voltage protection helps safeguard connected hardware.
Designed for flexible placement with built-in wall-mounting holes for fixed installation or four rubber feet for desktop use. The housing includes status LEDs for Power, PoE and PoE max, plus a grounding point and earthing kit for added protection.
Helps protect network equipment with ESD protection up to 8 kV through air and 6 kV by contact, plus port surge protection up to 4 kV. Internal power supply supports 100 to 240 VAC input, and the unit is fully NDAA-compliant for deployment needs.