Intellinet Outdoor PoE+ Extender Kit, 3280 Ft, 95W Input, IP67

Extend PoE power and Fast Ethernet data up to 1000 m or 3280 ft. over Cat5e or Cat6 cabling, helping place connected devices far beyond standard cable runs. The two included modules must be used together, and setup needs at least three Ethernet patch cable
Built for outdoor and indoor installations, each grey extender uses an IP67-rated weatherproof housing to resist dust and water. It operates from 14 to 131 degrees F, making it suitable for exposed camera links and other network runs in changing conditions
Accepts PoE input up to 95 W from a compatible injector or switch, so no separate outlet or local power supply is needed at the extender. The kit draws power directly from the PoE source, with maximum consumption of 0.4 W at no load and 0.7 W at full load.
Supports IEEE 802.3bt, 802.3at and 802.3af equipment on both the power sourcing and powered device sides, with 10/100 Mbps network speeds. It is designed for PoE cameras, wireless access points, VoIP phones and similar RJ45 network devices.
Distance and throughput are matched for long runs: delivers up to 30 W at 100 Mbps over 300 m or 984 ft., or up to 15.4 W at 10 Mbps over 800 m or 2625 ft. For output limits by cable type and length, refer to the product documentation chart.
Designed for straightforward deployment, this plug-and-play repeater kit requires no configuration and includes four IP67-rated cable glands plus instructions. Auto-sensing protection helps guard connected equipment against short circuits, overloads and hi
This set of two modules uses RJ45 connections and supports 10Base-T and 100Base-TX media over Cat3, Cat4, Cat5, Cat5e, Cat6 and Cat6a UTP or STP cable. Each unit measures about 6.18 x 1.14 x 1.14 in. for a slim in-line installation profile.