Intellinet Gigabit PoE++ Extender Repeater, 802.3bt, 65W, IP30

Extends a PoE connection beyond the usual 328 ft. limit by adding up to 328 ft. per segment, reaching 656 ft. total between a PoE switch or injector and a powered device while maintaining Gigabit Ethernet data on the same cable run.
Supports IEEE 802.3bt, 802.3at and 802.3af equipment, with one PoE input port and one PoE output port that pass 10/100/1000 Mbps traffic and deliver up to 65.2 W to compatible devices such as cameras, access points and VoIP phones.
Runs without a separate power adapter by drawing power directly from the PoE input, helping place connected devices where no outlet is available while using standard RJ45 cabling with Cat5e, Cat6, Cat6a or Cat8 network cable installations.
Built for tougher indoor spaces with an IP30-rated aluminum housing, wall-mounting holes and operating temperatures from 14 to 122 degrees Fahrenheit, making it suitable for warehouses, industrial rooms and other protected indoor installations.
Daisy-chain up to five extenders for long PoE runs up to 1969 ft. total, with available output power scaling by distance: 47 W at 984 ft., 32.25 W at 1312 ft., 23 W at 1640 ft. and 17.7 W at 1969 ft. for planning device loads.
Auto-sensing PoE sends power only to IEEE compliant devices and helps protect connected equipment with built-in short-circuit, overload and high-voltage protection, while a 2K MAC address table supports auto-learning and auto-aging.
Compact 4.8 x 1.5 x 1.18 in. design fits space-limited installs while providing one Gigabit PoE input and one Gigabit PoE output port; package includes the extender and instructions for adding distance to indoor PoE device deployments.