Intellinet 10-Port Gigabit Managed PoE++ Switch, 8 RJ45, 2 SFP, 242W Budget

Power eight connected devices through one switch with a 242 W PoE budget. Ports 78 provide up to 90 W each using PoE++, while ports 16 provide up to 30 W each using PoE+. Supports IEEE 802.3af, 802.3at, and 802.3bt.
Connect cameras, access points, VoIP phones, POS systems, or other Ethernet equipment through eight 10/100/1000 Mbps RJ45 ports. Auto-MDIX and NWay auto-negotiation detect connected equipment and select the appropriate network speed and connection settings
Use two open 1G SFP slots for fiber uplinks and connect the switch to additional network equipment. The 20 Gbps switching fabric, store-and-forward architecture, and 14.88 Mpps forwarding rate support managed network traffic across copper and fiber connect
Organize traffic with 802.1Q tag-based or port-based VLANs, LACP link aggregation, IGMP snooping, port mirroring, per-port bandwidth control, storm control, and CoS or DSCP quality of service. Jumbo frames are supported up to 9,216 bytes.
Configure the network through a web browser, Telnet, SSH, or the RJ45 console port. SNMP management with RMON, IPv4/IPv6 dual protocol support, MAC and IP access controls, DHCP snooping, Dynamic ARP Inspection, RADIUS, and TACACS+ support administration.
Monitor connected PoE equipment with Powered Device Monitor, also called PD Alive Check, which can restart a device that stops responding or sending traffic. Short-circuit, overload, high-voltage, and 4 kV RJ45 PoE surge protection help protect connected e
Install the metal switch on a desktop or in a 19-inch rack using the included brackets. An internal 100240 VAC power supply, grounding point, one cooling fan, power and link LEDs, and a console port support installation and status monitoring.