JL262A Specification
Type
Aruba 2930F 48G PoE+ 4SFP Switch
System specifications
I/O ports and slots
48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3 u Type 100BASE-TX, IEEE 802.3 ab Type 1000BASE-T, IEEE 802.3 at
PoE+) Duplex: 10BASE-T/100BASETX: half or full 1000BASE-T: full only
Additional ports and slots
1 dual-personality (RJ-45 or USB micro-B) serial console port
Memory and processor
Dual Core ARM Coretex @ 1016 MHz, 1 GB DDR3 SDRAM
Packet buffer size: 12.38 MB 4.5MB Ingress/ 7.875MB Egress, 4 GB eMMC
Management
Aruba AirWave Network Management; IMC Intelligent Management Center
Command-line interface
Web browser
Configuration menu
SNMP manager
Telnet
RMON1
FTP
Out-of-band management (serial RS-232C or micro USB)
Performance specifications
1000 Mb Latency
< 3.8 s (64-byte packets)
10 Gbps Latency
N/A
Throughput
up to 77.4 Mp/s
Switching capacity
104 Gb/s
Routing table size
10000 entries (IPv4), 5000 entries (IPv6)
MAC address table size
32768 entries
Physical specifications
Dimensions
4.39 x 44.25 x 30.42 cm ( 1.73 x 17.42 x 11.98 in)
1U height
Electrical specifications
80plus. org Certification
Silver
Description
N/A
Maximum heat dissipation
1652.13 kJ/hr (1566 BTU/hr )
Voltage
100 - 127 / 200 - 240 V ac, rated
Current
5.1 / 2.5 A
Maximum power rating
459 W
Idle power
48.6 W
Frequency
50/60 Hz
PoE power
370 W PoE+