PoE Texas 4 Port PoE/PoE+ Injector with 56V 60W Power Supply - Gigabit Injector - Active Mode A Power Over Ethernet Multi Port PoE Adapter - Supports 4 PoE (802.3af or at) up to 60 watts

About Us
PoE Texas has delivered Power over Ethernet solutions that expand the potential of your IT infrastructure without replacing it. With more than 150 products designed to integrate with existing network technology, PoE Texas has made the promise of PoE accessible to businesses all around the world from our headquarters in Austin, Texas. Our top-rated team of PoE experts work with companies of all types to deliver smart buildings for lighting and automation, displays, infrastructure, and anything else in need of intelligent power.
Power up to 4 IP cameras, desktop VoIP phones, WiFi access points, or other devices through a network data cable using this Power over Ethernet (PoE) midspan injector. Use with 56 volt high-powered Access Points, PTZ cameras, and other 802.3af or 802.3at PoE devices.
Active PoE/PoE+ on Mode A
Active PoE means the right power at the right time. An active PoE/PoE+ injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected. Mode A power delivery occurs on pins 1,2(-) 3,6(+)
Save Big on Network Upgrades and Device Installations
Power over Ethernet delivers power 328 feet from the injector, eliminating the expense and hassle of installing AC power near your powered device. Use this midspan injector to add PoE to an existing ethernet cable: 4 Data In (LAN) ports,4 Data + Power Out (PoE) ports. Or you can use the injector to increase the amount of PoE available to network devices downstream, without altering your upstream PoE switch equipment or network configuration. This PoE injector adds power without altering the data. Each PoE out port has its own Data In port with a total of 4 + 4 available on the multi port unit.
Simplify and Declutter Your Setup
Our midspan injector offers an array of PoE out ports all together in a single module for wide versatility and flexibility in installations. Instantly add PoE or PoE+ to any switch. Benefit from a cost-effective and efficient way to power multiple devices without changing your network configuration. Use this 4 port midspan injector for IEEE 802.3af PoE and IEEE 802.3at PoE+ applications. Eliminate clutter in your setup and extend power up to 328 feet (100 meters) distance from the source.
Replace up to 4 individual PoE injectors and consolidate your installation into a single, gigabit PoE+ module with 10/100/1000 Mbps data operation. Simplify your setup with all data ports (In) and all PoE ports (Out) housed together in one convenient, streamlined unit.
PoE/PoE+ for High-Powered Devices
WiFi Access Points
PTZ Cameras
Supports 4 x 802.3af devices (up to 15 watts each)
Supports 2 x 802.3at devices (up to 30 watts each)

Instantly upgrade your network switch to PoE+
Getting connected is easy. With our "green" AT injectors, you can upgrade your existing non-PoE gigabit network switch to PoE. Simply connect your Ethernet line to the injector and get up to 30 watts of PoE out.
Use with 56 volt high-powered PoE devices. There is a 650 mA self-resetting fuse / 30 watts per port. 56 volts allows power to travel even further. Ideal for network setups with a longer distance between the switch, this injector, and the downstream devices receiving power + data from the injector.
Power Budget (Total Watts) = 60 Watts
Watts per Port = 30 Watts
PoE Standard = IEEE 802.3af/at
PoE Method = Active
PoE Mode/Pinout = Mode A (-1,2 +3,6)
Output Voltage = 56 volts
Max. Amps per Port = 650 mA

Data rate = 10/100/1000
Lighting fast wired speeds with no loss of signal quality via 4 Data In ports and 4 Data + Power Out ports
Transmits data to devices up to 328 feet away

Wall mount tabs allow for secure installation.
Personalize and streamline your