Meet Your Seller

Chinathru Trading Co., Limited

See Seller Store

Main image of E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Alt view image 2 of 6 - E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Alt view image 3 of 6 - E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Alt view image 4 of 6 - E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Alt view image 5 of 6 - E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Alt view image 6 of 6 - E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Shop All E-link Products | Visit Chinathru Trading Co., Limited Store

E-link Industrial Gigabit PoE++ Injector 48V DC PoE++ 95W up to 100 Meters Output DIN Rail Mount Hardened High Power PoE Adapter -40°C to 80°C IP40

Be the first to review this product...

The 802.3bt POE Injector use 12~48VDC Power Input
The Industrial PoE Injector Supports IEEE802.3at/bt, LTPoE++ 95W
The Din Rail Mount PoE Injector Supports 10/100/1000Base-TX Gigabit Ethernet
The Hardened PoE++ Injector can offer power supply for POE devices such as Wireless Access Point, PTZ camera, Cash register etc.
Environmentally Hardened -40°C to 80°C Support DIN-Rail & Wall-mount installation

Overview

Reviews

Any questions? Our AI beta will help you find out quickly.

Try me now

Way To Set Up:
a) Connect the LNK-INJ-48-95W to the power supply. Ensure the power supply in connected to a power source and the PWR indicator is ON. If not, pls ensure that the power cable is connected properly and the power supply is functioning normally.
b) Connect the Ethernet Port to the network equipment (Switch or PC), Connect the PoE Out Port to the Power Device (PoE IP-CAM).
c) After all cables are correctly connected, the indicators will be lit as per port status LEDs
Package Content:
1 * 95W PoE Injector
1 * Quick Start Guide
StandardsIEEE802.3af Power over Ethernet, IEEE802.3at Power over Ethernet, IEEE802.3bt Power over EthernetProcessing TypeForward, Half-duplex, Full-duplexForward Filter Rate1,488,000pps (1000Mbps)Cabling10/100/1000Base-T: Cat5 or aboveMaximum DistanceCat5 UTP up to 100mConnector2 10/100/1000Base-T RJ45Input Power12~48VDC (Terminal Block)Power Consumption100W MaxPower Pin Assignment4/5(+), 7/8(-)Max. Power per Port95W Max per port (Alternative B Mode)Operating Temperature-40°C to 80°C (-40°F to 176°F)Storage Temperature-40°C to 85°C (-40°F to 185°F)MTBF>200,000hrsDimensions (WxDxH) 95 x 70 x 30 mm(37.4 x 27.56 x 11.81inch)Weight0.25Kg(0.551lb)Mounting OptionsDIN-Rail / Wall-mount

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
CONTACT

Return Policies

Return for refund within: 30 days
Return for replacement within: 30 days
This item is covered by Chinathru Trading Co., Limited Return Policy

Manufacturer Contact Info

For a directory of all our manufacturers, please click below.
Manufacturers Directory

Item#: 9SIC577KSW6132