E-link 1×1G RJ45 IEEE802.3bt 95W PoE++ Injector

It allows you to connect the PoE device such as camera and access point with a non PoE LAN switch within the distance of 100m. Both the Ethernet port (to switch) and the PoE Out port (to PoE device) support 10/100/1000Base-T and are compliant with IEEE 802.3ab. It provides 95W PoE output.
12~48VDC Input
IEEE802.3af/at/bt Standard
IP40 Aluminum Casing
6KV Lightning Protection
Din Rail&Wall Mount
The LNK-INJ-48-95W product is an Industrial hardened Gigabit single-port PoE+ IEEE 802.3at / LTPoE++ 95W 10/100/1000Base-TX PoE Injector.
Features:
1 RJ45 Ethernet Data Input Port + 1 RJ45 Power over Ethernet Output Port (Data + Power)
Support 95W LTPoE++ Power Sourcing Equipment
Compatible IEEE802.3at PoE+, Support 10/100/1000Base-TX
Supports DIN-Rail and Wall-mount installation
Extensive LED indicators for PoE diagnostics
12~48VDC Terminal Block Power inputs
Power Pin Assignment: 1/2/4/5(+),3/6/7/8(-)
Environmentally Hardened -40°C to 80°C (-40°F to 176°F) operating temperature
Way To Set Up:
a) Connect the LNK-INJ-48-95W to the power supply. Ensure the power supply in connected to a power source and the PWR indicator is ON. If not, pls ensure that the power cable is connected properly and the power supply is functioning normally.
b) Connect the Ethernet Port to the network equipment (Switch or PC), Connect the PoE Out Port to the Power Device (PoE IP-CAM).
c) After all cables are correctly connected, the indicators will be lit as per port status LEDs
Package Content:
1 * 95W PoE Injector
1 * Quick Start Guide
Standards IEEE802.3af Power over Ethernet, IEEE802.3at Power over Ethernet, IEEE802.3bt Power over Ethernet Processing Type Forward, Half-duplex, Full-duplex Forward Filter Rate 1,488,000pps (1000Mbps) Cabling 10/100/1000Base-T: Cat5 or above Maximum Distance Cat5 UTP up to 100m Connector 2 10/100/1000Base-T RJ45 Input Power 12~48VDC (Terminal Block) Power Consumption 100W Max Power Pin Assignment 4/5(+), 7/8(-) Max. Power per Port 95W Max per port (Alternative B Mode) Operating Temperature -40°C to 80°C (-40°F to 176°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) MTBF >200,000hrs Dimensions (WxDxH) 95 x 70 x 30 mm(37.4 x 27.56 x 11.81inch) Weight 0.25Kg(0.551lb) Mounting Options DIN-Rail / Wall-mount