Active PoE-Jack 4 Port in-Wall Gigabit PoE Ethernet Extender Switch Plate, IEEE 802.3bt Uplink, Passes VLAN, Extends Ethernet, Cameras, POS, WiFi AP, VoIP & More.1 Rear Port & 4 Ports Out the Front.

Active POE-Jack APOEJK2-WH POE Ports Screwless Faceplate Less cost to install More flexibility Gigabit uplink Gigabit ports IEEE 802.3bt Type 4 Class 8 uplink, 95w Power up to four IEEE 802.3af (Class 0,1,2,3) POE Power up to four IEEE 802.3at (Type 1, Class 0,1,2,3) POE+ Power up to three IEEE 802.3at (Type 2 Class 4) POE+ Remaining ports will pass ethernet without POE when full POE Budget is used 95 watt maximum PoE input (60 Watts from Output Ports, Max 30w from a single port) Single Signature PoE Passes VLAN traffic Extends IP / PoE an additional 328 feet Screwless snap on face plate for a clean install and look Fits standard electrical outlet receptacle / Single gang box / LV trim ring Bright Green LED indicator with on/off switch for LED indicator Grounding post Must be powered by POE switch or injector to work Operating standby power ethernet without POE under 2.5w Operating Temperature Range: -10 - 45C Operating Humidity : 5% to 90% Input Voltage Range: 44-56 volts through Uplink Port Listings: cETLus, FCC, CE, RCM, EMC, LVD, ISED, ROHS Improvements over previous model: Performance Improved Venting Green LED Indicator light LED Indicator light on/off switch Front venting through front on/off switch Rear uplink port is on the bottom to prevent debris Grounding post does not protrude past rear housing depth Shallower depth to fit standard electrical outlet receptacle / Single gang box (Handy Box) & fits in Single Gang LV Trim Rings Certifications / Listings / Approvals: cETLus, FCC, CE, RCM, EMC, LVD, ISED, ROHS *Requires a POE Injector or POE Switch **Patent Pending POE-Jack POE Jack Wall Plate POE Switch Application: UTP Wire Management DataCom Structured Cabling Network Cabling Data Center Data Centre Rack Mount Patch Panel Cat5e, Cat6, Cat6a