MokerLink 10 Port Industrial Din Rail Switch, 8 Ports 100Mbps,1 Gigabit Ethernet and 1 SFP Uplink, DIN-Rail & Wall Mount

MokerLink 10-Ports Gigabit Uplink 100M 8-ports Ethernet Industry Switch support 8* 100M RJ45 Ports+1* Gigabit Uplink Ports+1* SFP Ports. Support DIN-Rail & Wall mountssupport double power supply input (DC12-55V), working temperature -40~ +75It has passed the industrial environment certification. The reliable industrial design can ensure that your automation system runs without interruption and stability.
This series of industrial switches can be widely used in wind, electricity, assembly automation, subway PIS, power SCADA, sewage treatment, metallurgy, intelligent transportation, rail transportation, military and other industries,is a green low power industrial Ethernet switch.

Support 8* 100M RJ45 Ports+1* Gigabit Uplink Ports+1* SFP Ports.
IP30 protect grade, high strength iron shell, DIN35 Rail installation
Industrial grade 4 design, -40 to 85°C working temperature
Support redundant power supply access, support anti-reverse connection
Support VLAN, Extend, standard switch dial function
Support port Surge Protection: Common mode 6KV, Differential mode 2KV; ESD 15KV, Contact 8KV
The industrial switch support triple redundant power supply(1*DC input +2*2 pin terminal input). Each of the power supplies will have the capacity to run the device on its own. This makes sure that the switch could operate normally even if one power supply fails.
10-Port unmanaged industrial switch adopt with high strength IP30 protective housing, industrial EMC design to increase the reliability of communication network.
MokerLink industrial switches are designed with wide temperature support to ensure operation reliability in extreme temperatures ranging from -40ºC to +75ºC.
MokerLink industrial switches are housed in a compact sturdy metal case. the size is 138*108*44mm. you can mount it on the wall or cabinet.
10 port PoE industrial switch support 1 x gigabit uplink SFP port, The port10 use fiber cable to connect wired network segments throughout buildings or across campuses extending beyond the limitations of ethernet cabling.
Ultra compact industrial switche can be mounted on a 35mm din rail and wall(wall mount kit included). Save time and space.
By dialing or enabling extend mode on the front panel, the transmission distance of a port can be up to 250m, meeting the requirement of wired transmission (bandwidth reduced to 10Mbps).
When you enable the extend mode with DIP switch, switch divides traffic for ports 1-8 to prevent IP camera's muliticast or broadcast storm from affecting each other.
The industrial switch's 4KV surge protection can adapt to harsh outdoor environment and ensure the reliability of the uninterrupted network system.
Product Name 10-Ports Gigabit Uplink 100M 8-Ports Ethernet Industry Switch Product Model IND-F082GS Ethernet 8* 10/100M RJ45 Ports, 1* Gigabit Uplink port, 1* Gigabit SFP Port Bandwidth 5.6Gbps Packet Forwarding 4.166Mpps Jumbo frame 9.6Kbytes MAC Address 1K Network Protocol IEEE802.3, IEEE802.3u, IEEE802.3z Optical medium Multi-mode fiber: 850nm, 1310nm transmission distance: 550m/2Km, Single-mode fiber: 1310nm, 1550nm transmission distance: 20/40/60/80/100/120km Network Medium 10Base-T : Cat 3, 4, 5 or above UTP/STP(100m) 100Base-TX : Cat 5 or above UTP/STP(100m), 1000BASE-TX: Cat5 or above UTP (100 m) Working Environmen Working Temperature: -40~75°C Storage Temperature: -40~85°C Working Humidity 10%~90%non-condensing Storage Temperature5%~90%non-condensing Working Height: Maximum10,000 feet Storage Height: Maximum 10,000 feet LED Indicator PWR(On: Powered on | Off: Powered off), 1-8 green light(Slow flashing: 10/100M link normal | Off: Link off | Fast flashing: Link data transmitting), G10(On: Optical connecting properly | Off: Optical off | Flashing: Optical data transmitting) Structure size Product dimension: 138*108*44 mm, Package dimension: 245*190*60mm, Product N.W: 0.56 KG, Product G.W: 0.7 KG (without power) Pow